(based on 2 ratings)

The 200ULT is a complete dual-channel wireless system that consists of the 200UPR receiver and two 10BT transmitters.The new 200UPR receiver allows the use of two wireless transmitters at the same time. It features twin-antennas, a 3.5mm -64dbB 2-channel mic level output jack, two recessed On/Off switches, two Power On/ Signal Received LED and 2 sets of channel selectors to set the desired frequency for each receiver. Using crystal-control and PLL synthesis the 200UPR operates for better than 8 hours on 6 "AA" batteries. The receiver comes with a "hot-shoe" mount, a 3.5mm to 3.5mm output cable and a 3.5mm to twin XLR cable.Also included are two 10BT body-pack transmitters supplied with Azden EX-503 omni-directional lapel microphones and metal belt-clips. In addition to the 3.5mm mic input jack the transmitter has a Power On switch with an associated LED a separate Standby switch for audio muting and a set of channel selector switches. The 10BT runs better than 8 hours on a single 9V battery.200UPR ReceiverFrequency Range UHF 63-Channel Selectable (793.750 805.875MHz)Type of Reception 2 Channel ReceiverOscillator PLL SynthesizedRF Squelch Level 13dBVFrequency Response 50Hz 15kHzS/N Ratio >70dB A WeightedAudio Distortion <1% @ 1kHzOperating Temp. 0C 45C (32F 113F)MIC Out -64dBm @ 600 W - 3.5mm Mini-JackPower Requirement 6 1.5V AA Alkaline Batteries or 12VDC @ 200mA - 6 8 HoursDimensions 105W x 105H x 35D mm (4.13W x 4.13H x 1.38D inches)Weight Approx. 490g Including Batteries (17.28oz) 10BT TransmitterFrequency Range UHF 63-Channel Selectable (793.750 805.875MHz)Oscillator PLL SynthesizedRF Power 10mWFrequency Response 50Hz 15kHzMax. Deviation 75kHz @ 1kHz Modulation, MIC Input 11dBmS/N Ratio >70dB A WeightedAudio Distortion <1% @ 1kHzMIC Sensitivity 40kHz @ -22dBm MIC Input (0dBm+0.775V) - 3.5mm Mini JackOperating Temp. 0C 50C (32F 122F) Power Requirement 1 9V Alkaline Battery - 6 8 HourDimensions 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches)Weight Approx. 120g Including Battery (4.23oz)