Crucial Technology
Crucial 4gb Ddr3 Sdram Memory Module - 4 Gb - Ddr3 Sdram - 1600 Mhz Ddr3-1600/pc3-12800 - Non-ecc - Unbuffered - 240-pin - Dimm (ct51264bd160b)
(No reviews yet)
Write a Review
- SKU:
- 18155849
- MPN:
- ct51264bd160b
- Availability:
- Out of stock
- Stock Update:
- 08/07/2023 02:01:22 PM PST
- Stock Update:
- 08/07/2023 02:01:22 PM PST
Description
This item is brand-new, factory sealed.
When you buy Crucial memory, you're buying directly from the largest DRAM manufacturer in America and one of the top three in the world. Crucial Technology is a division of Micron. We have more than 20 years of industry experience and are the lowest-cost, most efficient DRAM manufacturer, and many of the world's leading computer manufacturers use our memory. Crucial brings that same high-quality memory directly to you, the end consumer.
Features
Compatibility:
Jetway MIH55T-MV2 Motherboard
Specs
| Physical Characteristics | |
| Form Factor | DIMM |
| Length | 5.3" |
| Number of Pins | 240-pin |
| Width | 1.2" |
| Warranty | |
| Limited Warranty | Lifetime |
| General Information | |
| Brand Name | Crucial |
| Manufacturer Website Address | http://www.micron.com |
| Marketing Information | Desktop modules that operate at speeds up to 1600 MT/s and have a CL11 latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3 UDIMM memory. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. |
| Product Type | RAM Module |
| Product Name | 4GB DDR3L SDRAM Memory Module |
| Manufacturer | Micron Technology, Inc |
| Manufacturer Part Number | CT51264BD160B |
| Technical Information | |
| Memory Technology | DDR3L SDRAM |
| Number of Modules | 1 x 4GB |
| Memory Size | 4 GB |
| CAS Latency | CL9 |
| Memory Speed | 1600 MHz |
| Device Supported | Desktop PC |
| Memory Voltage | 1.35 V |
| Memory Standard | DDR3L-1600/PC3-12800 |
| Error Checking | Non-ECC |
| Signal Processing | Unbuffered |
Warranty Information
All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose
Crucial 4gb Ddr3 Sdram Memory Module - 4 Gb - Ddr3 Sdram - 1600 Mhz Ddr3-1600/pc3-12800 - Non-ecc - Unbuffered - 240-pin - Dimm (ct51264bd160b)