Home » Accessories » Processor/case Fans » FDFANVENTHF14BK

Fractal Design Venturi Hp-12 Pwm Cooling Fan - 1 X 120 Mm - 1800 Rpm - 1 X 61.4... 

Oops! It appears we are out of stock or no longer selling this product.


Search Beach Audio for similar products



Venturi HF-14 Fan. Featuring true FDB-bearings providing silent operation coupled with a long lifespan. Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing further protecting the longevity of the bearing. Dense sturdy construction made from high-grade glass fiber reinforced thermoplastic polymer with fan geometry that is optimized for a good balance between static pressure and maximum airflow resulting in good performance in all usage scenarios. Aerodynamically shaped thin stator struts (including wire strut) mimicking the design commonly found on airplane wings delivering correct angles allowing for air to easily pass through reducing noise and unwanted turbulence. Stator struts are angled perpendicular to the blades helping to reduce noise commonly emitted when the blades pass the struts. In effect minimal noise that may be emitted will be constant and therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades further reducing and diffusing humming noise produced when the blades pass the stator struts .

Package Contents:
  • Venturi HP-12 PWM Cooling Fan
  • Screw Pack with 4 Metal Screws
  • 1 x 2 PWM Signal Splitter Cable


Package Contents: 
  • Venturi HP-12 PWM Cooling Fan
  • Screw Pack with 4 Metal Screws
  • 1 x 2 PWM Signal Splitter Cable

Application/Usage: Case

Environmentally Friendly: Yes

Environmental Certification: RoHS

Environmental Certification: WEEE

Country of Origin: China


General Information
ManufacturerFractal Design
Manufacturer Part NumberFD-FAN-VENT-HP12-PWM-BK
Manufacturer Website Addresshttp://www.fractal-design.com
Brand NameFractal Design
Product ModelHP-12 PWM
Product NameVenturi HP-12 PWM Cooling Fan
Marketing Information

The Venturi High Pressure Series PWM fans, HP-12 and HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.

Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.

The HP-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) and one compatible with the standard 120mm hole spacing (105mm).  The Venturi High Pressure Series PWM fans are ideal for those looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.

Product TypeCooling Fan
Fan Information
Number of Fans1
Fan Speed (rpm)1 x 1800 rpm
Fan Bearing TypeFluid Dynamic Bearing
Air Flow1 x 61.4 CFM
Noise Levels31.7 dB(A)
Fan Life17.1 Year
Physical Characteristics
Fan Diameter1 x 120 mm
Fan Height0.98"
Fan Width4.72"
Fan Depth4.72"
Weight (Approximate)6.31 oz
ProductTitleFractal Design Venturi HP-12 PWM Cooling Fan - 1 x 120 mm - 1800 rpm - 1 x 61.4 CFM - 31.7 dB(A) Noise - Fluid Dynamic Bearing - 4-pin - 17.1 Year Life

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Friday, December 29, 2017.


NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved