Home » Accessories » Processor/case Fans » FDFANVENTHP12PWMBK

Fractal Design Venturi Hf-14 Cooling Fan - 1 X 140 Mm - 1200 Rpm - 1 X 118.2 Cfm... 

Oops! It appears we are out of stock or no longer selling this product.


Search Beach Audio for similar products



Venturi HP-12 PWM Fan. Featuring true FDB-bearings providing silent operation coupled with a long lifespan . Equipped with a counter-pull magnet that reduces the axial tension on the bearing. Optimized fan geometry as a high pressure fan delivering high performance results in high restriction usage scenarios such as in use with large heatsinks or water cooling radiators. Dense sturdy construction made from high-grade glass fiber reinforced thermoplastic polymer. Featuring PWM control with a very wide speed range starting at only 400RPM (400 +/- 100 RPM) ideal for CPU heatsinks or radiators where the motherboard can control the fan speed based on the CPU temperature. Aerodynamically shaped thin stator struts (including wire strut) mimicking the design commonly found on airplane wings delivering correct angles allowing for air to easily pass through reducing noise and unwanted turbulence. Stator struts are angled perpendicular to the blades helping to reduce noise commonly emitted when the blades pass the struts. In effect minimal noise that may be emitted will be constant and therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades further reducing and diffusing humming noise produced when the blades pass the stator struts.

Package Contents:
  • Venturi HF-14 Cooling Fan
  • Screw Pack with 4 Metal Screws
  • Low Speed Adapter
  • 4 x Additional Rubber Corners, with 105mm Hole Pattern


Package Contents: 
  • Venturi HF-14 Cooling Fan
  • Screw Pack with 4 Metal Screws
  • Low Speed Adapter
  • 4 x Additional Rubber Corners, with 105mm Hole Pattern

Application/Usage: Case

Environmentally Friendly: Yes

Environmental Certification: RoHS

Environmental Certification: WEEE

Country of Origin: China


General Information
ManufacturerFractal Design
Manufacturer Part NumberFD-FAN-VENT-HF14-BK
Manufacturer Website Addresshttp://www.fractal-design.com
Brand NameFractal Design
Product LineVenturi
Product ModelHF-14
Product NameVenturi HF-14 Cooling Fan
Marketing Information

The Venturi High Flow Series fans, HF-12 and HF-14, are optimized for low-restriction airflow environments, making them an excellent choice for computer case fans, or other low-restriction usage scenarios.

Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air compared to other fans at the same, minimal noise level.

The HF-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) and one compatible with the standard 120mm hole spacing (105mm). The Venturi High Flow Series fans are ideal for those looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.

Product TypeCooling Fan
Fan Information
Number of Fans1
Fan Speed (rpm)1 x 1200 rpm
Fan Bearing TypeFluid Dynamic Bearing
Air Flow1 x 118.2 CFM
Noise Levels26.5 dB(A)
Fan Life17.1 Year
Physical Characteristics
Fan Diameter1 x 140 mm
Fan Height0.98"
Fan Width5.51"
Fan Depth5.51"
Weight (Approximate)7.13 oz
ProductTitleFractal Design Venturi HF-14 Cooling Fan - 1 x 140 mm - 1200 rpm - 1 x 118.2 CFM - 26.5 dB(A) Noise - Fluid Dynamic Bearing - 3-pin - 17.1 Year Life

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Tuesday, December 12, 2017.


NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved