Home » Accessories » Test Equipment » 62200

Ideal Linkmaster Pro Tester - 1 X Rj-45 Network , 1 X Rj-45 Network Remote -... 

12 in stock (as of 12/03/2016 08:38 PM)

Shipping Estimate:
Qualifies for only $4 shipping!
Including Alaska and Hawaii!
Ideal Linkmaster Pro Tester - 1 X Rj-45 Network , 1 X Rj-45 Network Remote - Network Testing Device (62200) (62-200)
Zoom panel loading...


Ideal
Additional Images:   Medium | Large | Original | 900 | 1100 | 1500 | 2000 | 2500 | 3000
Added to our catalog within last 30 days
Model: 62-200
View other products from Ideal

$80.55
Estimated Shipping: $4.00

Description

The LinkMaster PRO Tester enables installers,contractors and maintenance technicians to map, test and troubleshoot data and voice communication cable and coax runs. Rugged, versatile, and easy-to-use, the LinkMaster PRO tester has mastered the link between performance, simplicity and value for both commercial and residential applications.

Specification

General Information
ManufacturerIDEAL Industries, Inc
Manufacturer Part Number62-200
Manufacturer Website Addresshttp://www.idealindustries.com
Brand NameIDEAL
Product LineLinkMaster PRO
Product NameLinkMaster PRO Tester
Marketing Information

The LinkMaster PRO Tester enables installers,contractors and maintenance technicians to map, test and troubleshoot data and voice communication cable and coax runs. Rugged, versatile, and easy-to-use, the LinkMaster PRO tester has mastered the link between performance, simplicity and value for both commercial and residential applications.

Product TypeNetwork Testing Device
Technical Information
Device Function
Minimum Length Measurement3 ft
Maximum Length Measurement600 ft
Interfaces/Ports
Network (RJ-45)Yes
Number of Network (RJ-45) Ports2
Controls/Indicators
Status Indicators
  • Battery low LED
  • OPEN - There is no "OPEN" LED indication. A typical cable may have 2, 3, or 4 pairs. OPENS are displayed as an unlit LED. The user will determine if a pair is present and continuous or OPEN by comparing the illuminated LEDs to the expected number of pairs that should be good. For example, when testing a 4 pair cable, three illuminated LEDs in the PASS area indicate the presence of an OPEN condition in one of the pairs
  • SHORT - A short circuit condition exists
  • MISWIRE - Indicates the improper assignment of individual wire pairs to pins for the wiring schemes tested. Tester checks T568A, T568B, 10Base-T, and Token Ring configurations
  • REVERSAL - Reverse wiring means the pin for one wire in a pair is connected to the opposite pin for the pair in the remote jack
  • SPLITPAIRS - Split Pairs occur when the tip (positive conductor) and ring (negative conductor) of two twisted pairs are interchanged

Pass Indicators:

  • T568A and T568B
  • Four green LEDs on pairs 1-2, 3-6, 4-5, and 7-8. All four pairs are terminated correctly
  • Token Ring
  • Two green LEDs on pairs 3-6, and 4-5. Both pairs terminated correctly
  • 10 Base-T
  • Two green LEDs on pairs 1-2, and 3-6. Both pairs terminated correctly
  • Shield
  • Green SHIELD LED indicates the shield on the cable is correctly and continuously wired through the modular plug termination

FAIL Indicators:

  • A flashing pair LED indicates that this wire pair has a fault. A flashing LED in the FAIL section will indicate which fault was detected. Multiple flashing LEDs indicate multiple pairs and/or multiple faults. Best practice is to correct cable faults until cable is verified as correct with appropriate green LEDs
Battery Information
Battery Size SupportedAA
Physical Characteristics
Height3.3"
Width2"
Depth1.3"
Weight (Approximate)2 lb
Title
ProductTitleIDEAL LinkMaster PRO Tester - 1 x RJ-45 Network , 1 x RJ-45 Network Remote

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Saturday, December 03, 2016.

Code:7-62-200

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved