Oops! It appears we are out of stock or no longer selling this product.
Search Beach Audio for similar products
FEATURES- 4-Port Video Splitter- 150MHz
The Video Separator is a signal booster and splitter that is used to
take video input from a single source and direct it to four video
outputs for monitors using analog signals. The signal boost
obtained by using the VS-94 allows you to not only split the signal
but to extend the distance so that you can send the signal to about
210 feet. This is no mean feat, your average VGA card, over a
standard VGA cable, sends a clear VGA signal approximately 25 feet.
This makes public broadcasts from a single computer very feasible.
If you want to display the same information on many monitors at
once, such as in a classroom environment, or at a demonstration,
this product performs incredibly well.
* Bandwidth is the term that is used to describe the signal capacity of
these units. In general, bandwidth is directly proportional to the amount
of data transmitted per unit of time. Specifically, in analog signals,
bandwidth is the difference between the highest-frequency and the lowest
frequency components of a given signal. For example a voice telephone
signal has a bandwidth of 3000Hz (or 3000 cycles per second), where an
analog TV signal has a bandwidth of approximately 6MHz (or 6 million
cycles per second) which is approximately 2000 times greater than a
simple voice phone call. These units have a bandwidth of 150MHz (which is
150 million cycles per second) and that is 25 times greater than a simple
TV signal. This huge bandwidth allows for the transmission of large
amounts of information at a very high rate of speed, and thus you can use
the very high resolution setting of 1280 x 1024 in 24 or 32 bit true
color mode at a refresh rate of 75Hz.
* One video input with two video outputs.
* Transmission distance of up to 210 feet.
* Suitable for SVGA, VGA, and Multisync monitors.
* Daisy-Chain multiple units together for even more outputs.
* Power-save mode, when the computer is off the power indicator LED's
CONNECTORs- Input: (1) x 15 pin HDB Male
Output: (4) x 15 pin HDB Female
INDICATORs- LED for Power
BANDWIDTH - VGA: 150MHz (-3dB)
RESOLUTION- 1280 x 1024 @ 75 Hz
SIGNAL TYPE- VGA; SVGA; MultiSync
DISTANCE - 210 ft. max.
SWITCHES - Video Signal Gain Control
POWER- DC 9V 180mA (Max)
SIZE - 7.4"w x 2.28"h x 5.2"l WT.- 15.75 ounces
MANUFACTURER WARRANTY: 1 YEAR
- 1 x VS-94A Video Splitter
- 1 x DC 9V Power Adapter
- 1 x User Manual
- Supports DDC, DDC2, DDC2B (Port 1 Only)
- Daisy Chainable
- All Metal Housing
- Small Form Factor
Certifications & Standards:
- FCC Part 15 Class A
|Manufacturer Part Number||VS94A|
|Manufacturer Website Address||http://www.aten-usa.com|
|Product Name||4 port Video Splitter|
The video splitter is a boosting device that duplicate the video signal from any anolog monitor source to four (VS-94A)outputs. As such, they provide fast, flexible, solutions for situations such as:
In addition, unit can be daisy chained to handle as many monitors as the installation requires, making them excellent solutions for public broadcast systems. To achieve multiple high quality VGA, SVGA, or Multisync video signals over long distances, these video splitter is your best choice.
|Product Type||Video Switchbox|
|Number of Input Devices Supported||1|
|Number of Displays Supported||4|
|Maximum Video Resolution||1920 x 1440|
|Maximum Video Bandwidth||250 MHz|
|Media & Performance|
|Maximum Operating Distance||213 ft|
|Input Voltage||9 V DC|
|Power Consumption||1.62 W|
|Weight (Approximate)||15.87 oz|
|ProductTitle||Aten 4 port Video Splitter - 1 x Computer, 4 x Monitor - 1920 x 1440 @ 60Hz - SVGA, XGA|
|Limited Warranty||3 Year|
|Beach Audio Warranty|
This product was added to our catalog on Tuesday, November 22, 2016.