SHOP BY BRAND
Home » Lisle
Pages: 1 2 3 4 5 ... [Next >>]
Displaying 1 to 20 (of 778 products)
Brake cylinder hone with three 240 grit stones fits cylinders from 27/32" to 2" Flexible shaft designed to be driven by variable speed drill. Controlled pressure makes it possible to polish or hone with just one stone grit. Stones have square ends - hone to the end in step cut and bli... <more>
50 in stock
features and benefits: skin-packed. 3-stone set replacement for lis10000 shipping wt. 1 oz.
16 in stock
features and benefits: special abrasive pads polish the cylinder without cutting. stones are 1 " long. skin-packed. Shipping wt. 3 oz.controlled pressure, three abrasives and flexible driver give good stability and speed with this disk brake hone 3 leg for 1 1/2" to 3 1/8"... <more>
21 in stock
Special abrasive pads polish the cylinder without cutting. Controlled pressure, three abrasives and flexible driver give good stability and speed.
2 in stock
features and benefits: 2-stone hone fits cylinders 11/16" to 2-1/2" (7.4 - 63.5mm) square ends of stones hone to the end in step-cut and blind-end cylinders 240 grit stones are 1-1/8" long flexible driver skin-packedcontrolled pressure makes it possible to polish or ... <more>
15 in stock
features and benefits: skin-packed. shipping wt. 1 oz.
18 in stock
Double ended tools are offset for easy access For 5/16" or 3/8" bleeder screws
37 in stock
Double ended tools are offset for easy access For 1/4" or 3/8" bleeder screws
1 in stock
Features and Benefits: For bleeding air from brake cylinders with 7mm & 9mm bleeder screws Double ended tools are offset for easy access to hard to reach bleeder screws
7 in stock
Features and Benefits: For bleeding air from brake cylinders with 8mm & 10mm bleeder screws Double ended tools are offset for easy access to hard to reach bleeder screws
5 in stock
For 8 Gallon Oil Lift Drain (11102)
This specially shaped, translucent jug holds 8 gallons Reinforced base will not warp with hot oil Has a wide working range from 36 1/2" to 74" Its lower center of gravity increases stability and four 2 1/2" ball bearing wheels swivel and roll easily Also has a heavy-duty adjustme... <more>
8 in stock
features and benefits: cleans dirt and corrosion from battery terminals and cable clamps the external brush cleans cable clamps and internal brush cleans terminal posts case is made of high impact plastic that will not weaken in cleaning solutions skin-packed. Shipping wt. 2 oz.
50+ in stock
Double ended tool for removing and installing brake springs Use plier tips to stretch brake spring Handle ends remove and install spring over anchor post
Quick release height adjustmentRolls easily with four heavy-duty 2-1/2 inches wheelsTranslucent jug for easy readingDrains from the bottom with a brass drain valveLarge 15 funnel has a built in strainer to catch drain plugs
Coil Spring cutters polish the battery contact while stainless steel brushes clean the cable terminals
Cuts Flexible Hose up to 1 1/4". The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4". The stainless steel blade is reversible for double the life. Plier is made of glass-filled nylon for strength.
Hose cutter will cleanly cut fuel lines, heater hoses and other types of flexible hose up to 1-1/4. Stainless steel blade is reversible for double the life. Plier is made of glass filled nylon for strength.
For Oil Lift Drain models 11102 or 17432.Huge selection to choose from.Ready to ship at your convenience.Satisfaction ensured.
- products have enhanced descriptions, specifications, and/or images available
Beach Audio - RSS Feed for Lisle
Sales and Support
© 2014 Beach Audio, Inc. All Rights Reserved