Home » Office Equipment & Supplies » Supplies » Print Supplies » 3d Printer Cartridges » MP01969

MakerBot True Black ABS 1kg Spool 1.75mm / 1.8mm Filament (mp01969) 

Oops! It appears we are out of stock or no longer selling this product.

Model: MP01969

Search Beach Audio for similar products

   

Description

MakerBot ABS Filament is the best, most consistent, and most tested ABS filamentfor MakerBot® Replicator® 2X Experimental 3D Printers.MakerBot ABS Filament is good for detailed prints and can be used in conjunctionwith MakerBot® Dissolvable Filament. The dissolvable filament acts as solid infillmaterial.Each filament color is comprehensively quality tested at both 100 micron and 200-micron layer resolutions on the MakerBot Replicator 2X to verify it will perform everyfeature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model.Every filament color undergoes long duration testing to ensure that there are nodeviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing.Consistently round diameter - ensures highest print quality and consistent flowthrough the extruder nozzle.MakerBot ABS Filament adheres well to kapton tape on heated build plate. MakerBot ABS Filament requires a heated build platform. Also, ensure your build plate is level, clean and oil-free. Use MakerBot ABS Filament in a well-ventilated area.

Features

  • Spool Diameter: 8 in
  • Spool Width: 3 in
  • Spool Hub Hole: 2 in
  • Diameter: 1.75 mm

  • Temperatures:
  • Glass Temp: 105°C (221°F)
  • Melting Temp: 1Amorphous, no "true" melting point
  • Nozzle Temp: 230°C (446°F)


  • Compatibility: MakerBot 3D Printers:
    • Replicator 1
    • Replicator 2X
    • Thing-O-Matic Stepstruder MK6+ and Up


    Specification

    General Information
    ManufacturerMakerBot Industries, LLC.
    Manufacturer Part NumberMP01969
    Manufacturer Website Addresshttp://www.makerbot.com
    Brand NameMakerBot
    Product NameTrue Black ABS 1kg Spool 1.75mm / 1.8mm Filament
    Marketing InformationMakerBot ABS Filament is the best, most consistent, and most tested ABS filamentfor MakerBot® Replicator® 2X Experimental 3D Printers.

    MakerBot ABS Filament is good for detailed prints and can be used in conjunctionwith MakerBot® Dissolvable Filament. The dissolvable filament acts as solid infillmaterial.

    Each filament color is comprehensively quality tested at both 100 micron and 200-micron layer resolutions on the MakerBot Replicator 2X to verify it will perform everyfeature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model.

    Every filament color undergoes long duration testing to ensure that there are no
    deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing.

    Consistently round diameter - ensures highest print quality and consistent flow
    through the extruder nozzle.

    MakerBot ABS Filament adheres well to kapton tape on heated build plate. MakerBot ABS Filament requires a heated build platform. Also, ensure your build plate is level, clean and oil-free. Use MakerBot ABS Filament in a well-ventilated area.
    PackingSpool
    Product Type3D Printer ABS Filament
    Technical Information
    Print ColorTrue Black
    Physical Characteristics
    Weight (Approximate)2.20 lb
    Title
    ProductTitleMakerBot True Black ABS 1kg Spool 1.75mm / 1.8mm Filament - True Black

    Warranty Information

    Beach Audio Warranty

    This product was added to our catalog on Tuesday, July 18, 2017.

    Code:11-mp01969

    NetSuite ecommerce design

    © 2014 Beach Audio, Inc. All Rights Reserved