Home » Office Equipment & Supplies » Supplies » Print Supplies » 3d Printer Cartridges » MP06049

Makerbot Neon Pink Pla Small Spool / 1.75mm / 1.8mm Filament - Neon Pink... 

2 in stock (as of 12/08/2016 05:55 AM)

Shipping Estimate:
Qualifies for only $4 shipping!
Including Alaska and Hawaii!
Makerbot Neon Pink Pla Small Spool / 1.75mm / 1.8mm Filament - Neon Pink (mp06049)
Zoom panel loading...


Additional Images:   Medium | Large | Original | 900 | 1100 | 1500 | 2000 | 2500
Added to our catalog within last 30 days
Model: MP06049
View other products from Makerbot

$40.95
Estimated Shipping: $4.00

Description

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.

If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.

MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is level, clean and oil-free before printing.

Features

  • Spool Diameter: 15.0 cm (5.90 in)
  • Spool Width: 4 cm (1.57 in)
  • Spool Hub Hole: 5.08 cm (2 in)
  • Filament Diameter: 1.75 mm


Compatibility: MakerBot Printers:
  • Replicator 2
  • Replicator Mini
  • Replicator 5th Generation Model
  • Replicator Z18


Specification

General Information
ManufacturerMakerBot Industries, LLC.
Manufacturer Part NumberMP06049
Manufacturer Website Addresshttp://www.makerbot.com
Brand NameMakerBot
Product NameNeon Pink PLA Small Spool / 1.75mm / 1.8mm Filament
Marketing Information

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.

If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.

MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is level, clean and oil-free before printing.

PackingSpool
Product Type3D Printer PLA Filament
Technical Information
Print ColorNeon Pink
Physical Characteristics
Weight (Approximate)8 oz
Title
ProductTitleMakerBot Neon Pink PLA Small Spool / 1.75mm / 1.8mm Filament - Neon Pink

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Thursday, December 08, 2016.

Code:11-mp06049

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved