Home » Office Equipment & Supplies » Supplies » Print Supplies » 3d Printer Cartridges » MP06101

MakerBot Army Green PLA Large Spool / 1.75mm / 1.8mm Filament (mp06101) 

18 in stock (as of 12/05/2016 03:28 AM)

Shipping Estimate:

MakerBot Army Green PLA Large Spool / 1.75mm / 1.8mm Filament (mp06101)
Zoom panel loading...


Additional Images:   Medium | Original | 900
Added to our catalog within last 30 days
Model: MP06101
View other products from Makerbot

$61.76
Estimated Shipping: $8.00

Description

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances. Be sure your build plate is level, clean and oil-free before printing.

Features

  • Spool Diameter: 25.0 cm (9.84 in)
  • Spool Width: 4 cm (1.57 in)
  • Spool Hub Hole: 5.08 cm (2 in)
  • Filament Diameter: 1.75 mm


Compatibility: MakerBot Printers:
  • Replicator 2 and Earlier Models
  • Replicator 5th Generation Model
  • Replicator Z18


Specification

General Information
ManufacturerMakerBot Industries, LLC.
Manufacturer Part NumberMP06101
Manufacturer Website Addresshttp://www.makerbot.com
Brand NameMakerBot
Product NameArmy Green PLA Large Spool / 1.75mm / 1.8mm Filament
Marketing Information

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.

If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.

MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is level, clean and oil-free before printing.

PackingSpool
Product Type3D Printer PLA Filament
Technical Information
Print ColorArmy Green
Physical Characteristics
Weight (Approximate)2 lb
Title
ProductTitleMakerBot Army Green PLA Large Spool / 1.75mm / 1.8mm Filament - Army Green

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Monday, December 05, 2016.

Code:11-mp06101

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved