Home » CSEFE1029100

Transition Networks Point System Ethernet Or Fast Ethernet Media Converter - 1 X... 

Oops! It appears we are out of stock or no longer selling this product.

Model: CSEFE1029-100

Search Beach Audio for similar products

   

Description

Transition Networks CSEFE1029-100 Ethernet / Fast Ethernet media converter is designed to be installed in a Transition Networks PointSystem chassis and is a 10Mbps or 100Mbps switch-selectable media converter. It is a speed selectable copper to fiber media converter that allow you to extend the distance between copper based connections with the use of fiber optic cable. This converter is a true layer 1 device as both the copper and fiber ports operate at the same speed setting. For 10Mbps applications, these devices must be used in pairs.

Features

  • The CSEFE1029-100 media converter is designed to be installed in pairs
  • Link Pass Through
  • Remote Firmware Upgrade
  • Selectable speed setting

Switches:

  • Switch 1: Link Pass Through on/off
  • Switch 2: 10Mb or 100Mb operation

3-position Jumper:

  • Hardware: Converter mode is determined by DIP switch settings.
  • Software: Converter mode is determined by most recently saved on-board microprocessor settings


Compatibility: 

PointSystem Chassis



Certifications & Standards: 
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3z

Regulatory Compliance:

  • CISPR/EN55022 Class A
  • EN55024
  • EN60950 Class A
  • FCC Class A
  • CE Mark


Specification

General Information
ManufacturerTransition Networks, Inc
Manufacturer Part NumberCSEFE1029-100
Manufacturer Website Addresshttp://www.transition.com
Brand NameTransition Networks
Product LinePoint System
Product ModelCSEFE1029-100
Product NamePoint System Ethernet or Fast Ethernet Media Converter
Marketing Information

Transition Networks CSEFE1029-100 Ethernet / Fast Ethernet media converter is designed to be installed in a Transition Networks PointSystem chassis and is a 10Mbps or 100Mbps switch-selectable media converter. It is a speed selectable copper to fiber media converter that allow you to extend the distance between copper based connections with the use of fiber optic cable. This converter is a true layer 1 device as both the copper and fiber ports operate at the same speed setting. For 10Mbps applications, these devices must be used in pairs.

Product TypeTransceiver/Media Converter
Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
Media & Performance
Media Type Supported
Fiber Mode SupportedSingle-mode
Maximum Distance Supported12.43 Mile
Network & Communication
Ethernet TechnologyFast Ethernet
Network Technology
Physical Characteristics
Form FactorInternal
Height3.4"
Width3.4"
Depth5"
Title
ProductTitleTransition Networks Point System Ethernet or Fast Ethernet Media Converter - 1 x RJ-45 , 1 x SC - 10/100Base-TX, 100Base-FX

Warranty Information

Limited WarrantyLifetime
Beach Audio Warranty

This product was added to our catalog on Sunday, November 01, 2009.

Code:3-csefe1029-100

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved