Home » SFEPE1014110

Transition Networks Power Over Ethernet 100base-tx To 100base-fx Stand-alone... 

Oops! It appears we are out of stock or no longer selling this product.

Model: SFEPE1014-110

Search Beach Audio for similar products

   

Description

Transition's DC powered PoE media converter combine data received over a fiber optic link with -48VDC power, providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. This PoE converter is Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af 2003 standard. This converter also include a PD signature sensing and power monitoring features IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. SFEPE1014-100 product can operate in two modes. IEEE 802.3af mode as well as "legacy mode". In the IEEE 802.3af mode the POE is fully compatible with devices that comply with the IEEE802.3af standard. The POE converter is also capable of inserting power on either the spare pairs or data pairs of the MDI.

In the "legacy mode" POE can be configured for reverse polarity, 12 VDC, 24 VDC, or 48 VDC power insertion; as well as for other non-IEEE802.3af compatible PDs.

Features

  • Fault Protection Input
  • Internal AC power supply
  • Over-Current Protection
  • Under-Current Protection
  • Minimum Load Sensing
  • PSE MDI Power Enable/Disable
  • Signal Pair and Spare Pair Power Insertion
  • Max 16.8 Watts Power output capacity at 48 VDC
  • Exceeds IEEE802.3af ripple requirements on PSE MDI power leads


Certifications & Standards: 
  • IEEE 802.3u
  • IEEE 802.3af

Compliance:

  • EN55022:1994+A1:1996+A2:1997 Class A
  • FCC Part 15 Subpart B
  • UL 1950


Specification

General Information
ManufacturerTransition Networks, Inc
Manufacturer Part NumberSFEPE1014-110
Manufacturer Website Addresshttp://www.transition.com
Brand NameTransition Networks
Product ModelSFEPE1014-110
Product NamePower over Ethernet 100BASE-TX to 100BASE-FX Stand-Alone Media Converter
Marketing Information

Transition's DC powered PoE media converter combine data received over a fiber optic link with -48VDC power, providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. This PoE converter is Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af 2003 standard. This converter also include a PD signature sensing and power monitoring features IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. SFEPE1014-100 product can operate in two modes. IEEE 802.3af mode as well as "legacy mode". In the IEEE 802.3af mode the POE is fully compatible with devices that comply with the IEEE802.3af standard. The POE converter is also capable of inserting power on either the spare pairs or data pairs of the MDI.

In the "legacy mode" POE can be configured for reverse polarity, 12 VDC, 24 VDC, or 48 VDC power insertion; as well as for other non-IEEE802.3af compatible PDs.

Product TypeTransceiver/Media Converter
Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
SC Port TypeDuplex
Media & Performance
Media Type Supported
Fiber Mode SupportedSingle-mode
Maximum Distance Supported12.43 Mile
Network & Communication
Ethernet TechnologyFast Ethernet
Network Technology
Power Description
Input Voltage
Physical Characteristics
Height1.2"
Width1.2"
Depth4.4"
Title
ProductTitleTransition Networks Power over Ethernet 100BASE-TX to 100BASE-FX Stand-Alone Media Converter - 1 x RJ-45 , 1 x SC Duplex - 100Base-TX, 100Base-FX

Warranty Information

Limited WarrantyLifetime
Beach Audio Warranty

This product was added to our catalog on Sunday, November 01, 2009.

Code:3-sfepe1014-110

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved