SHOP BY BRAND
Home » Moclamp
Pages: 1 2 3 4 [Next >>]
Displaying 1 to 20 (of 68 products)
The Angle Bite is a self-cleaning, self-tightening clamp with a gator tooth design and a 45 degree head for those hard-to-pull areas, such as the Mercedes 107 front chassis rail. Drop-forged wedge for extra durability and long life.
3 in stock
These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
2 in stock
Similar to the popular #0300 JR Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to-get-to areas.
8 in stock
Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 1 1/2" high (38 mm), 1 1/4" deep (32 mm).
5 in stock
Replacement adaptor plate for the #0800. 1 1/2 " pull plate.
Replacement adaptor plates for the MCL-0800 3 pull plate.
23 in stock
features and benefits: for use with the 0800 tack-n-pull clamp (not included) reusable plates includes the following: (10) 0801 1" pull plates, (5) 0802 1" pull plates, and (5) 0803 3" pull plates heat-treated steelthis is used for hard-to-hold pulls. ... <more>
22 in stock
features and benefits: light and easy to use with slide hammer or pulling post use the panel puller on fender openings, deck lids, door posts and other openings heat treated alloy steel made in the u.S.A. specs: overall length: 8" (203 mm) width: 3" (82 mm) w... <more>
features and benefits: one of the handiest tools in the shop for a quick pull almost anywhere new round opening allows for pulling with a slip hook new casting process makes for a tighter grain structure, resulting in more strength the original straight-cut tooth design is machined... <more>
A handy chain hook-up pulling plate for making double pulls. The special design allows for either wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8... <more>
New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring-loaded for easy opening. Specifications: Gripping surface: 1 1/4 wide (32 mm), 1 deep (25 mm) Over... <more>
Designed for a wide variety of strut towers. Permits fast hook-up and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility for pulling over and around obstructions such as fenders. Also use in conjunction with #1450 Numerous Angle... <more>
4 in stock
The harder you pull, the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. a 3 1/2" (89mm) cored hole is r... <more>
Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (MCL-0810 & MCL-0820) to pull, or use in combination with clamps.
features and benefits: alloy heat treated hooks increase pulling options may be used with #0810 and #0820 hole pull plates to pull, or use in combination with clamps made in the u.S.A. specs: weight: approximately 2 lbs (.91 kg) each capacity: 2 tons (1,814 kg)
Mo-Clamps fixed head sheet metal hooks have the highest pulling capacity of any similar sized sheet metal hooks in the industry Made from forged steel alloy - engineered andtested to Mo-Clamp standards and covered bythe Mo-Clamp Forever warranty - theseeconomical alternatives can be the answer toyo... <more>
Features and Benefits: Bar holes and is designed for three ways of pulling, using the shackle and oval loop The clamps have recessed pockets to hold the bolts stationary for easy tightening Heat treated steel Made in the U.S.A. Specs: Gripping surface: 8" wide Weight... <more>
features and benefits: clamp has recessed pcokets to hold bolts stationary for easy tightening includes #4043 oval loop made of heat treated steel made in the u.S.A. specs: gripping surface: 4" wide; 3/4" deep overall length: 8"; weight: 12 lbs. capacity... <more>
9 in stock
One pair Frame Rack Dyna-Mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tightening.
features and benefits: clamp has recessed pockets to hold bolts stationary for easy tightening includes #4043 oval loop gripping surface: 4" wide, 1/2" deep overall length: 8"; weight: 8 lbs. capacity: 6 tons made of heat treated steel and made in the u.S.A.
- products have enhanced descriptions, specifications, and/or images available
Beach Audio - RSS Feed for Moclamp
Sales and Support
© 2014 Beach Audio, Inc. All Rights Reserved