SHOP BY BRAND
Home » Peerless
Pages: 1 2 3 4 5 ... [Next >>]
Displaying 1 to 20 (of 202 products)
Use with EXT fixed-length extension columnsJoins extension columnsBlack epoxy finish, 2" overall length, 1 1/2" internal pipe threads, 6 locking screwsShipping package dimensions: 5.5x3.25x2.25 (len x wid x dep)Package Contents:1 x Extension Column Connector 1 x Security allen wrench (4 mm) 2 x Phil... <more>
3 in stock
Accessory shelves are designed to be used with Peerless-AV flat panel carts and stands.Package Contents:ACC319 Video Conferencing Shelf Kit Includes: 1 x Center Mount1 x Interface Bracket1 x Video Conference Shelf4 x (M5 x 6mm) Socket Pin Serrated Washer Head Screw2 x Square Nut2 x (1/4 x 12mm) Deco... <more>
1 in stock
The electrical outlet strip with cord wrap is designed to hold a Peerless extension cord to Peerless carts & the horizontal cross supports of the Jumbo 2000 mounts. It can virtually be used with any of the Peerless product.
Can be used to attach to a single stud only when weight of mount and equipment does not exceed 35 lb See specific models for quantity needed and compatibility. Can be used to attach loads greater than 35 lb only where specified for Peerless models that contain a wall plate which spans two or more st... <more>
Enables VESA 100x100 display adaptors to work with display with VESA 200x100 or 200x200 mounting patterns.
The Peerless ACC550 Unistrut Adapter for Truss Ceilings lets you mount equipment weighing up to 250 lbs below a unistrut.Heavy gauge cold rolled steel construction.Compatible with Peerless EXT006 - EXT110 columns or ADJ006009 - ADJ1012 1.5 - 11.5 NPT columns.
The ACC556 Cathedral Ceiling Adapter can be attached to a finished ceiling (wood joists above drywall) using the two washer head wood screws included, or a structural ceiling (concrete) using concrete anchor accessory kit ACC200 (sold separately).Jumbo Mount attaches to ACC556 with flush mount tube ... <more>
The Peerless ACC558 Single Monitor I-Beam Clamp is designed to anchor a Peerless ceiling mount to an overhead I-beam.The ACC558 has a 4" adjustable range, from 4 - 8".The architect or installer must verify that the I-beam will safely support the combined load of all attached hardware and components... <more>
The I-Beam Clamp is designed to anchor a Peerless ceiling mount to an overhead I-beam. Two sizes are available, with a 4" (102 mm) or 5" (127 mm) adjustment range. The 1 1/2-11.5 NPS threaded fitting is compatible with Peerless Extension Columns (several models available, both fixed length and adjus... <more>
Peerless acc560 ceiling plate (No cable management) Max load: 150 lbs Low-Profile design Mounts to wood joist, structural ceiling & concrete 1.5" - 11.5" npt fitting for attachment of extension columnBlack No cable managementPackage Contents:1 x ACC560 Structural Ceiling Plate 2 x (#14 x 2.5") Wood ... <more>
19 in stock
Model ACC570 Round Ceiling Plate is compatible with all Peerless® projector mounts. The Round Ceiling Plate is also compatible with many Peerless small to medium size TV mounts (see maximum load warning).
10 in stock
Metal Stud Fastener Kits can be used to attach to a single stud only when weight of mount and equipment does not exceed 35 lb. Metal stud fasteners can be used on double stud Peerless mounts only where specified. Can be used to attach loads greater than 35 lb only where specified for Peerless models... <more>
6 in stock
Escutcheon Ring visually enhances suspended ceiling installations by covering hole where extension column passes through ceiling tile. Ring is hinged to open, wrap around extension column and snap into place to cover hole in ceiling tile.
The Safety Belt is designed to wrap around the back of the television for additional roll out protection.
Compatible with Peerless ceiling mounts, EXT and ADJ extension columnsFeatures 120 of adjustmentSecurity slot for theft resistance
Mount a DVD player or VCR underneath your flatscreen with the ACC 932 bracket. Designed to fit the SA740 LCD wall arm mount, the ACC 932 allows you to attach a Peerless DVD or VCR bracket underneath your flat panel. Features: Connects Peerless DVD/VCR brackets to articulating arm and ceiling mounts ... <more>
PEERLESS INDUSTRIES ACC978 EPSON SHORT THROW ADAPTOR
50+ in stock
4PCS NON-SECURITY FAST PAC
The SmartMount ® Metal Shelf is designed to attach to the newly redesigned SmartMount SR Flat Panel cart and SS Flat Panel stand. The shelf provides a secure yet sleek surface for various AV equipment and accessories to create the best viewing experience.Package Contents: Metal Shelf Attachment ... <more>
- products have enhanced descriptions, specifications, and/or images available
Beach Audio - RSS Feed for Peerless
Sales and Support
© 2014 Beach Audio, Inc. All Rights Reserved