Home » Computers » Storage Components » Hard Drives » SD7SN6S128G1122

Sandisk X300 128 Gb 2.5" Internal Solid State Drive - Sata - 520 Mbps... 

Oops! It appears we are out of stock or no longer selling this product.

Model: SD7SN6S-128G-1122

Search Beach Audio for similar products

   

Description






RELIABLE AND RESPONSIVE PERFORMANCE WITH LOW POWER




Based on state of the art 1Ynm TLC flash technology, the SanDisk X300 SSD
delivers performance with high reliability and low power. It features nCache 2.0, SanDisks next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads.



nCache 2.0 Technology



nCache 2.0 uses a combination of both SLC and TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the TLC blocks is minimized. The new On Chip Copy (OCC) mechanism then independently copies the SLC cache blocks into the TLC blocks in main storage, thus offloading the burden from the controller and DDR resources. This leaves the DRAM cache and controller free for other tasks.



Reliability


The X300 SSD also includes a new and robust on-the-fly error handling mechanism called Multi-Page Recovery (MPR). It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot.



Low Power


The X300 utilizes a SATA DEVSLP low-power mode, compatible with Microsoft InstantGo, to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices.Device
SanDisk X300 SSDCapacity
128GBForm Factor
M.2 2280Interface
SATA Revision 3.2 (6 Gb/s) Backward Compatible to SATA Revision 2.0 (3 Gb/s) and SATA Revision 1.0 (1.5 Gb/s)Performance
Sequential Read up to (MB/s): 520
Sequential Write up to (MB/s): 415
Rand Read up to (IOPS): 73k
Rand Read up to (IOPS): 40k
Endurance (TBW): Up to 72Power (Average)
Active Power (mW): 95
Max Read Operating (mW): 2300
Max Write Operating (mW): 2950
Slumber (mW): 70
DEVSLP (mW):

Specification

General Information
ManufacturerSanDisk Corporation
Manufacturer Part NumberSD7SN6S-128G-1122
Manufacturer Website Addresshttp://www.sandisk.com
Brand NameSanDisk
Product SeriesX300
Product NameX300 SSD (Solid State Drive)
Marketing Information

RELIABLE AND RESPONSIVE PERFORMANCE WITH LOW POWER

Based on state of the art 1Ynm TLC flash technology, the SanDisk X300 SSD
delivers performance with high reliability and low power. It features nCache™ 2.0, SanDisk's next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads.

The X300 is highly versatile and can accommodate a wide range of computing platforms. It is available in 2.5" 7mm cased, M.2 2280, and mSATA form factors with capacities of 128GB, 256GB, 512GB, and 1TB*.

Product TypeSolid State Drive
Additional Product Specifications
Full Product SpecificationsClick to view
Technical Information
Storage Capacity128 GB
Features
Drive Performance
Maximum Read Transfer Rate520 MB/s
Maximum Write Transfer Rate415 MB/s
Network & Communication
Wireless LANNo
Interfaces/Ports
Drive InterfaceSATA
Drive Interface StandardSATA/600
Physical Characteristics
Drive TypeInternal
Form FactorM.2 2280
Drive Width2.5"
Height0.1"
Width0.9"
Depth3.1"
Weight (Approximate)0.26 oz
Title
ProductTitleSanDisk X300 128 GB 2.5" Internal Solid State Drive - SATA - 520 MB/s Maximum Read Transfer Rate - 415 MB/s Maximum Write Transfer Rate - M.2 2280

Warranty Information

Limited Warranty3 Year
Beach Audio Warranty

This product was added to our catalog on Tuesday, October 25, 2016.

Code:3-sd7sn6s-128g-1122

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved