Home » Sir Tools

Browse
Sir Tools 2727 Dual Overhead Cam Lock Tool With Two Sets Of Rods
Added to our catalog within last 30 days

Sir Tools 2727 Dual Overhead Cam Lock Tool With Two Sets Of Rods

Locks Twin & Quad Cam Pulleys from rotating by clamping onto the spokes like a constrictor. Fully adjustable, this tool comes complete with (1) pair 8 and (1) pair 4.5 inch long rods with left / right hand threads. The shorter rods are needed for confined spaces where interference with the fi... <more> 

Sir Tools Model: 2727_45

$90.00

10 in stock

Sir Tools ST9024 Fold-up Wire Terminal Extractor Kit With [6] Barbs:
Added to our catalog within last 30 days

Sir Tools ST9024 Fold-up Wire Terminal Extractor Kit With [6] Bar...

Internationally patented design offers the technician a handy all in one extractor kit that folds up and slides together into its own unique and compact storage housing Equipped with factory correct extractor press bits Press bits release DC wiring terminals from its harness that connect to ECUs,... <more> 

Sir Tools Model: 9024

$45.62

1 in stock

Sir Tools 9050 Portable Strut Master
Added to our catalog within last 30 days

Sir Tools 9050 Portable Strut Master

Sir Tools Model: 9050

$679.00

This product qualifies for FREE Ground Shipping!

1 in stock

Sir Tools B90 Wheel Bearing And Hub Removal And Replacement Kit
Added to our catalog within last 30 days

Sir Tools B90 Wheel Bearing And Hub Removal And Replacement Kit

Designed to easily remove and install the wheel bearing and hub of spindle assemblies. Applicable: Most every 3, 5, 6, 7 and 8 series models from the early '80 to present with S.R.W.B and I.R.S., including A.W.D. This is the best value for R and R of the Rear Wheel Hub & Bearing of German vehic... <more> 

Sir Tools Model: B90

$956.04

This product qualifies for FREE Ground Shipping!

1 in stock

Sir Tools SIR-HO110 Complete Cam Shaft Seal Installer Kit
Added to our catalog within last 30 days

Sir Tools SIR-HO110 Complete Cam Shaft Seal Installer Kit

Complete H0110 assembled for the Professional Honda & Acura Technician consisting of sub-kits that share the same step bolt and press nut HO100 Cam Shaft Seal Installer is applicable on Honda engines 1.8L, 2.0L, 2.2L. All 4 cylinder Honda engines, '84+, and some 4 cylinder motorcycle engines ... <more> 

Sir Tools Model: HO110

$94.52

1 in stock

Sir Tools SIR-P250 Flywheel Oil Seal Arbor
Added to our catalog within last 30 days

Sir Tools SIR-P250 Flywheel Oil Seal Arbor

This special service tool was developed for the proper installation of oil seal on Flywheel side of crank shaft To do this task with any other method is risking a total engine failure by way of a damaged oil seal Applicable: Porsche model - 996 & Boxster

Sir Tools Model: P250

$174.26

This product qualifies for FREE Ground Shipping!

1 in stock

Sir Tools SIR-ST9007-4
Added to our catalog within last 30 days

Sir Tools SIR-ST9007-4

Sir Tools Model: ST90074

$7.42

1 in stock

Sir Tools ST9007 5 Piece Handy Panel Remover Set
Added to our catalog within last 30 days

Sir Tools ST9007 5 Piece Handy Panel Remover Set

This special 5pc. Double ended tool kit (excluding one) was designed to air the technician in disassembly of door panels, fascia/trim strips of dshboards, window installation, etc. Made from impact resistant nylon plastic, it wont scratch or mar parts like similar metal versions.

Sir Tools Model: ST9007_43

$26.91

10 in stock

Sir Tools ST9009 23-in-1 Mini-uni-drive Kit
Added to our catalog within last 30 days

Sir Tools ST9009 23-in-1 Mini-uni-drive Kit

features and benefits: removal and replacement of small fastening screws of dashboards, radios, ecu, instrument panels, etc. quick double ended application and interchange shaft length adjustment for hard to reach areas anti-corrosion tips rotating head all pieces are neatly... <more> 

Sir Tools Model: ST9009

$29.70

This product qualifies for $4 Shipping!

10 in stock

Sir Tools ST9012 9 Piece Professional 1000v Insulated Screwdriver Kit
Added to our catalog within last 30 days

Sir Tools ST9012 9 Piece Professional 1000v Insulated Screwdriver...

features and benefits: rated for 1000v an unique to the industry quick release driver handle for greater leverage of screw r and r a small free spinning button head "handle" for delicate / precision r and r of screws 7 insulated blades (most common size for hybrids) 3 phil... <more> 

Sir Tools Model: ST9012

$55.28

5 in stock

Sir Tools ST9015 O.e. Radio Key Switch Blade
Added to our catalog within last 30 days

Sir Tools ST9015 O.e. Radio Key Switch Blade

features and benefits:   allows for a “double fisted pull” or tug for easy radio extraction all in one fold up radio removal key kit applicable up to '07 models each removal key is secured within its rigid body folds up to fit in your pocket internationally... <more> 

Sir Tools Model: ST9015

$33.08

This product qualifies for $4 Shipping!

5 in stock

Sir Tools ST9020-KIT Air-gun Pneumatic Brake Caliper Piston Compressor Master Kit
Added to our catalog within last 30 days

Sir Tools ST9020-KIT Air-gun Pneumatic Brake Caliper Piston Compr...

Features and Benefits Rotates Left or Right in order to Wind-Back Pistons allowing serious time savings with less effort Straight shot, down the center continuous force. The pressing shaft of this air-gun is acting on a force of 1:1 from the air-compressor Solid cast aluminum body is durab... <more> 

Sir Tools Model: ST9020KIT_43

$224.16

This product qualifies for FREE Ground Shipping!

10 in stock

Sir Tools ST9020 Air-gun - Pneumatic Brake Caliper Piston Compressor
Added to our catalog within last 30 days

Sir Tools ST9020 Air-gun - Pneumatic Brake Caliper Piston Compres...

Features and Benefits Rotates Left or Right in order to Wind-Back Pistons allowing serious time savings with less effort Straight shot, down the center continuous force. The pressing shaft of this air-gun is acting on a force of 1:1 from the air-compressor. Solid cast aluminum body is dura... <more> 

Sir Tools Model: ST9020_43

$138.68

This product qualifies for FREE Ground Shipping!

10 in stock

Sir Tools ST9025 Fold-up Wire Terminal Extractor Kit With 12 Barbs
Added to our catalog within last 30 days

Sir Tools ST9025 Fold-up Wire Terminal Extractor Kit With 12 Barb...

features and benefits allows for a proper one handed leverage to press out wire terminals each wire terminal key is secured within its rigid body all in one fold up terminal kit applicable up to '07 models and beyond folds up to fit into your pocket stop losing pieces as with other te... <more> 

Sir Tools Model: ST9025

$44.00

This product qualifies for $4 Shipping!

4 in stock

Sir Tools ST9029 Six Piece Pry-tool Kit
Added to our catalog within last 30 days

Sir Tools ST9029 Six Piece Pry-tool Kit

features and benefits specifically designed with extra slim profiles for the finer jobs special contours and unique features for effective and safe removal of fine or delicate bezels and fascia the pry tools won't scratch or mar fascia like metal tools can it tackles finer jobs that sirs... <more> 

Sir Tools Model: ST9029

$29.70

This product qualifies for $4 Shipping!

10 in stock

Sir Tools ST9030 Professional Pry Master Set 11 Pc Plastic
Added to our catalog within last 30 days

Sir Tools ST9030 Professional Pry Master Set 11 Pc Plastic

The Ultimate 11 pc. PRY MASTER Set is an exclusive combination of two very popular kits. Complete with a professional canvas storage roll pouch, it easily converts to a standing heads-up display or lays flat on a dashboard. This is very useful for quick reference & easy access while on the j... <more> 

Sir Tools Model: ST9030

$53.84

5 in stock

Sir Tools ST9050 Portable Strut Master Strut Compressor
Added to our catalog within last 30 days

Sir Tools ST9050 Portable Strut Master Strut Compressor

Exclusive self contained compressor designed with fully adjustable jaws It has a wide coil spring and strut application range Equipped with the exclusive safety latch mechanism

Sir Tools Model: ST9050

$665.78

This product qualifies for FREE Ground Shipping!

1 in stock

Sir Tools SIR-ST9060 3-jaw Press Master
Added to our catalog within last 30 days

Sir Tools SIR-ST9060 3-jaw Press Master

Universal and fully adjustable bearing, race, and seal driver all in one No fumbling with fixed-sized pucks Fits 18.5 - 89mm (0.72 - 3.50I.D. Press 40mm (1.5) deep Durable tempered aluminum alloy Lock bolt holds jaws dimension Steel striker cap

Sir Tools Model: ST9060

$164.05

This product qualifies for FREE Ground Shipping!

1 in stock

Sir Tools TOY100 4 Cylinder Toyota Camshaft Tool
Added to our catalog within last 30 days

Sir Tools TOY100 4 Cylinder Toyota Camshaft Tool

Overall Length 2.5" Used for proper installation of the cam shaft seal on transversely mounted Japanese engines, placing the cam shaft within close proximity to the shock tower Due to this confined area, it is extremely difficult to replace the cam seal using conventional methods Applicable... <more> 

Sir Tools Model: TOY100

$70.41

1 in stock



Enhanced descriptions and specifications available - products have enhanced descriptions, specifications, and/or images available


Beach Audio - RSS Feed for Sir Tools Beach Audio - RSS Feed for Sir Tools

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved