Oops! It appears we are out of stock or no longer selling this product.
Search Beach Audio for similar products
FEATURES- 5.25" Drive Bay Cooling Fan Kit
Triple fan hard drive cooling kit provides maximum airflow for hot-
running hard drives, preventing overheating failures and extending
the life of the drive.
The fan unit mounts in any free 5.25" half feight drive bay, and the
hard drive is mounted directly behind it using the supplied 3.5" to
5.25" adapter brackets. Fresh cool external air is drawn into the
case through a removable, cleanable filter and blown directly over
the hard drive by 3 quiet running ball bearing fans. Perfect for
extending the life of hot running 7200, 10,000 or 15,000 RPM IDE
and SCSI hard drives in servers.
* Uses three high-efficiency, ultra-quiet cooling fans.
* Hardware mounting kit provided for 3.5" hard drives.
* Includes power splitter cable to draw power from your PC without reducing
the total number of existing power connectors.
CONNECTORs- LP4 hard drive power tap
AIR FLOW - 25 CFM @ zero static pressure
NOISE- 38 dBA
MTBF - 45,000 hours
MANUFACTURER WARRANTY: 1 YEAR
- FANDRIVE 5.25" Drive Bay Hard Drive Cooler
- Hardware Mounting Kit
- Power Splitter Cable
- Color: Beige
- Filter Type: Mesh
- Enclosure Dimension: 150mm x 40mm
- Hardware Mounting Kit: For 3.5" Hard Drives
- Perfect for extending the life of hot running 7200 RPM, 10000, & 15000 RPM IDE & SCSI hard drives in servers
- Power Splitter Cable: To Draw Power From Your PC Without Reducing The Total Number Of Existing Power Connectors
- Bay Size: 5.25"
- Hard Drive Size: 3.5"
- Hard Drive Type: IDE & SCSI
|Manufacturer Part Number||FANDRIVE|
|Manufacturer Website Address||http://www.startech.com|
|Product Name||3.5" HDD Bracket Kit for 5.25" Front Bay|
|Marketing Information||This front panel HDD cooler features three 40mm x 40mm x 20mm ball bearing fans, helping to eliminate the heat that can build up at the front of a PC case as a result of typical drive/system operation._x000D_ The HDD cooler can be mounted in an available 5.25in half-height drive bay, with a hard drive positioned directly behind it. The HDD cooler includes 3.5in to 5.25in adapter brackets, allowing the cooler to be used with either size of drive._x000D_ The HDD cooler draws fresh, cool external air into the case through a removable, cleanable filter and blown directly over the hard drive by the quiet-running ball bearing fans - an efficient, nearly silent solution for extending the life of hot running 7200 RPM, 10000, and 15000 RPM IDE and SCSI hard drives in servers.|
|Product Type||Cooling Fan|
|Fan Bearing Type||Ball Bearing|
|Air Flow||3 x 25 CFM|
|Connectors||4-pin LP4 (Male)|
|Fan Diameter||3 x 40 mm|
|Weight (Approximate)||8.78 oz|
|ProductTitle||StarTech.com 3.5in Hard Drive Bracket Kit for 5.25in Front Bay with Triple Fans - 3 x 40mm 3 x Ball Bearing|
|Limited Warranty||2 Year|
|Beach Audio Warranty|
This product was added to our catalog on Thursday, November 04, 2004.