Home » Steck Manufacturing

Browse
Steck Manufacturing 16600 Air Tool Oiler Dispenser
Added to our catalog within last 30 days

Steck Manufacturing 16600 Air Tool Oiler Dispenser

features and benefits: manufacturer oiling requirements are easily performed when mounted close to air tool storage easily adjustable for specified amount of oil self-centering, non drip oil dispenser head design keeps everything clean easy to install! easy to use! works with al... <more> 

Steck Manufacturing Model: 16600_43

$51.51

50+ in stock

Steck Manufacturing 17000 Door Jammer
Added to our catalog within last 30 days

Steck Manufacturing 17000 Door Jammer

Features and Benefits:   Hold the door open while you hammer, pull, grind, sand or paint For door and deck lids Hold solid Fits any size latch  

Steck Manufacturing Model: 17000_45_1

$35.74

2 in stock

Steck Manufacturing 17100 Hatch Jammer Lift Gate And Hatch Holder
Added to our catalog within last 30 days

Steck Manufacturing 17100 Hatch Jammer Lift Gate And Hatch Holder

features and benefits: allows body shop technicians to hold lift gate or hatch in a partially open position for sanding, painting or buffing including being able to work on the edges of the panel hatch jammer easily adjusts the work angle of the hatch door to a comfortable and secure positi... <more> 

Steck Manufacturing Model: 17100_45

$38.59

1 in stock

Steck Manufacturing 17200 Hatchjammer Xl Prop And Extension Tube
Added to our catalog within last 30 days

Steck Manufacturing 17200 Hatchjammer Xl Prop And Extension Tube

features and benefits: hatch jammer xl easily adjusts the work angle of the hatch door from 15” to 21” to 34” and to full extension of 59” the hatch jammer xl will stabilize the hatch for easier prep and painting of the hatch as well as holding the hatch fully open t... <more> 

Steck Manufacturing Model: 17200_43

$54.91

16 in stock

Steck Manufacturing 20000 "the Original" Pull Rod Set
Added to our catalog within last 30 days

Steck Manufacturing 20000 "the Original" Pull Rod Set

features and benefits: super tough alloy steel is precisely heat-treated for maximum strength every steck pull rod and pick pull is factory tested under a 500 pound (228 kg) load. vinyl coated handle is comfortable to use includes: (4) pull rods (2) pick pulls (1) stainles... <more> 

Steck Manufacturing Model: 20000_43

$44.73

5 in stock

Steck Manufacturing 20007 Pull Rods [2pk]
Added to our catalog within last 30 days

Steck Manufacturing 20007 Pull Rods [2pk]

Pull Rod Set, 2 Piece, 500 lb Capacity Each, Super Tough Alloy Steel with Vinyl Coated Handles

Steck Manufacturing Model: 20007_43

$23.09

This product qualifies for $4 Shipping!

8 in stock

Steck Manufacturing 20012 Handybar Multi-purpose Tool
Added to our catalog within last 30 days

Steck Manufacturing 20012 Handybar Multi-purpose Tool

features and benefits: uniquely designed durable, non-marring tool chisel end allows the technician to repair body lines in sheet metal without scrapping off rust protective coatings hammer inside quarter panels, rear body panels, body lines, etc. use to block doors and hoods sa... <more> 

Steck Manufacturing Model: 20012_43

$22.35

1 in stock

Steck Manufacturing 20013 Tab-it Adapter For The Stud Lever, For Pulling Glue Tabs Or Pull Pins, With Padded Extension Block
Added to our catalog within last 30 days

Steck Manufacturing 20013 Tab-it Adapter For The Stud Lever, For ...

Quickly pull glue tabs in the PDR process or pull pins in the traditional body shop process while controlling the dent pulling process as well as accuracy of the pull. Quick attachment to the stem of the glue tab while combining leverage, accuracy and compression of crown area with the initial pul... <more> 

Steck Manufacturing Model: 20013_43

$25.26

3 in stock

Steck Manufacturing 20014C Stud Lever Combo
Added to our catalog within last 30 days

Steck Manufacturing 20014C Stud Lever Combo

Controlled Stud Pulling The Steck Stud Lever will allow a technician to quickly grip studs (pull pins) and control the dent pulling process as well as the accuracy of the pull. Accurate controlled pulls every time Grips studs (pull pins) quickly and easily Standard tool works on 2.0, 2.2, and 2.6 m... <more> 

Steck Manufacturing Model: 20014C

$61.91

3 in stock

Steck Manufacturing 20015 Seam Buster Spot Weld Chisel
Added to our catalog within last 30 days

Steck Manufacturing 20015 Seam Buster Spot Weld Chisel

features and benefits: chisel tip for starting seam separation chisel edge for easily moving along seam easily separate spot welded or bonded panels save up to 15 minutes per panel replacement for quarter panels, rockers and any other pinchweld sharpened on two edges. The sharp... <more> 

Steck Manufacturing Model: 20015_43

$33.09

21 in stock

Steck Manufacturing 20016 Right Angle Seambuster
Added to our catalog within last 30 days

Steck Manufacturing 20016 Right Angle Seambuster

features and benefits easily separates hard-to-reach spot welded or bonded panels sharpened on three edges, the sharp end allows for penetration between the panels and both side edges allow for side impact to drive the panels apart without damage 90 degrees end for use in hard-to-reach pinc... <more> 

Steck Manufacturing Model: 20016_43

$35.13

21 in stock

Steck Manufacturing 20017 Super Seambuster
Added to our catalog within last 30 days

Steck Manufacturing 20017 Super Seambuster

The Super SeamBuster can now be driven by means of an air hammer to separate spot welded or bonded panels. (Note: Spot welds must still be drilled out first before using Super SeamBuster or any SeamBuster product). The Super SeamBuster is designed to attach to any air hammer for faster and more effi... <more> 

Steck Manufacturing Model: 20017_43

$52.82

3 in stock

Steck Manufacturing 20022 Quarter Puller
Added to our catalog within last 30 days

Steck Manufacturing 20022 Quarter Puller

features and benefits: pulls rear quarter and wheel well hooks above the lip of the wheel opening two curvatures (one on each side) will fit almost all cars easier and faster than clamps or jacks 3000 lb. Max. Pull  

Steck Manufacturing Model: 20022_43

$48.72

6 in stock

Steck Manufacturing 20033 Quarter Puller Qp2 [small]
Added to our catalog within last 30 days

Steck Manufacturing 20033 Quarter Puller Qp2 [small]

features and benefits: hooks above the lip of the wheel opening two curvatures (one on each side) will fit almost all cars easier and faster than clamps or jacks 3000 lb. Maximum pull for smaller openings    

Steck Manufacturing Model: 20033

$46.56

19 in stock

Steck Manufacturing 20037 Flange Lever
Added to our catalog within last 30 days

Steck Manufacturing 20037 Flange Lever

features and benefits: unique double ended reverse 1/4“ hook design made from hardened alloy steel gives the technician easy access to buckled metal edges flat hook allows for easy manual alignment while the 35° angle bar allows technician to access areas like radiator supports ... <more> 

Steck Manufacturing Model: 20037_43

$28.05

10 in stock

Steck Manufacturing 20055 Fender Fixer
Added to our catalog within last 30 days

Steck Manufacturing 20055 Fender Fixer

Collision force to one front fender often travels through the hood to push out the top of the opposite fender. The Fender Fixer rolls that fender top back into shape in just minutes Follow these three simple steps: 1) Hook strap below fender. 2)Place chisel point of tool into corner of bolt flange... <more> 

Steck Manufacturing Model: 20055_43

$53.16

1 in stock

Steck Manufacturing 20085 Ez Pull Pliers
Added to our catalog within last 30 days

Steck Manufacturing 20085 Ez Pull Pliers

Quick access to grip and pull multiple pull pins (studs) as well as vertical and horizontal flanges. Tough alloy steel locking pliers with its 3½ X 1 vice jaw provides an evenly distributed pulling force while pulling multiple pull pins and flanges. EZ Pull Pliers also has two large pulli... <more> 

Steck Manufacturing Model: 20085_43

$51.51

50+ in stock

Steck Manufacturing 20099 Pogo Ii
Added to our catalog within last 30 days

Steck Manufacturing 20099 Pogo Ii

One hand operation. Core supports repaired quickly. Hook bolt heads, flanges, anywhere... Fits in your toolbox (overall length 18-3/8)

Steck Manufacturing Model: 20099

$61.68

13 in stock

Steck Manufacturing STK-20099 Pogo Ii
Added to our catalog within last 30 days

Steck Manufacturing STK-20099 Pogo Ii

One hand operation. Core supports repaired quickly. Hook bolt heads, flanges, anywhere... Fits in your toolbox (overall length 18-3/8)

Steck Manufacturing Model: 20099_59

$69.98

3 in stock

Steck Manufacturing 20222 Handy Pull Kit
Added to our catalog within last 30 days

Steck Manufacturing 20222 Handy Pull Kit

features and benefits: allow a technician to perform light duty pulling of tapped holes in automotive body structures as well as proper hood and trunk alignment contains three metric (6mm, 8mm and 10mm) eyebolts, 3-1/4” metal offset hinge pull plate and a 3” right angle metal ba... <more> 

Steck Manufacturing Model: 20222_43

$39.88

8 in stock



Enhanced descriptions and specifications available - products have enhanced descriptions, specifications, and/or images available


Beach Audio - RSS Feed for Steck Manufacturing Beach Audio - RSS Feed for Steck Manufacturing

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved