The b140-1a0 is an active extender remote unit for the b140-002 (2-port) and b140-004 (4-port) dvi over cat5 extender/splitter local units. When using 24awg solid wire cat5e/6 cable (tripp lite n202-series) a dvi-d single-link signal can be extended up to 200 ft. At 1024 x 768 (60hz); or up to 100 ft. At 1600 x 1200 (60hz). A built-in equalization control allows for adjustment of the video image. When used with a b140-002 or b140-004 the b140-1a0 is hdcp compatible. Mounting hardware is included that allows the unit to be rackmounted wallmounted or pole mounted. Compliant with the federal trade agreements act (taa) for gsa schedule purchases. 1 year limited warranty. Key features active extender remote unit for the b140-002 (2-port) and b140-004 (4-port) extender/splitter local units extends a dvi-d single-link signal up to 200 ft. At 1024 x 768 (60hz); or up to 100 ft. At 1600 x 1200 (60hz) when using 24awg solid wire cat5e/6 cable (tripp lite n202-series) hdcp compatible when used with a b140-002 (2-port) or b140-004 (4-port) extender/splitter local unit mounting hardware is included that allows the unit to be rackmounted wallmounted or pole mounted compatible with all operating systems plug and play; no drivers required compliant with the federal trade agreements act (taa) for gsa schedule purchases 1 year limited warranty package includes b140-1a0 dvi over cat5 active extender remote unit mounting hardware screwdriver for adjustment of equalization external power supply (input: 100-240v 50/60hz 0.5a output: 5v 2a) owner's manual
The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..
Video Extender Receiver
Number of Input Devices Supported
Number of Output Devices Supported
Maximum Operating Distance
Maximum Video Resolution
1920 x 1080
Number of Network (RJ-45) Ports
Number of DVI Outputs
Media & Performance
Media Type Supported
Twisted Pair Cable Standard
Tripp Lite DVI Over Cat5/Cat6 Active Video Extender Remote Video Receiver 1920 x 1080 200' - 1920x1080 at 60Hz