Home » Computers » Network & Communication » Video Consoles/extenders » B1401P0

Tripp Lite B140-1p0 Dvi Over Cat5 Passive Extender Cabl Remote Unit Taa/gsa... 

Oops! It appears we are out of stock or no longer selling this product.

Model: B140-1P0

Search Beach Audio for similar products

   

Description

The B140-1P0 is a passive extender remote unit for the B140-002 (2-Port) and B140-004 (4-Port) DVI Over Cat5 Extender/Splitter local units. When using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series), a DVI-D single-link signal can be extended up to 100 ft. at 1024 x 768 (60Hz); or, up to 50 ft. at 1600 x 1200 (60Hz). The built-in DVI-D single link male connector plugs directly into a monitor without the need for an additional cable. When used with a B140-002 or B140-004, the B140-1P0 is HDCP compatible. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty.



Package Contents:
  • B140-1P0 Video Console
  • Owner's Manual

Features

Package Contents: 
  • B140-1P0 DVI Over Cat5 Passive Extender Remote Unit
  • Owner's Manual


Certifications & Standards: TAA

Environmentally Friendly: Yes

Environmental Certification: RoHS

TAA Compliant: Yes

Specification

General Information
ManufacturerTripp Lite
Manufacturer Part NumberB140-1P0
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB140-1P0
Product NameDVI Over Cat5 Passive Extender Remote Unit
Marketing Information

The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 100 ft..

Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance100 ft
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
DVI OutYes
Number of Network (RJ-45) Ports1
Number of DVI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Title
ProductTitleTripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100' - 1 Input Device - 1 Output Device - 100 ft Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - TAA Compliant

Warranty Information

Limited Warranty1 Year
Beach Audio Warranty

This product was added to our catalog on Tuesday, November 29, 2016.

Code:18-b140-1p0

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved