Tripp Lite Smartpro Smart2200rm2u 2200va Rack-mountable Ups - 2200va/1920w - 5 Minute Full Load - 4 X Nema 5-15r, 4 X Nema 5-15/20r

This item is brand-new, factory sealed.

2200VA / 2.2kVA / 1920 watt line interactive UPS system with high power factor for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed depth of only 19 inches. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages to maintain regulated 100, 110, 120v selectable output over an input range of 83-145V.



Includes NEMA 5-20P input plug and both NEMA 5-15R and 5-15/20R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling.



Emergency Power Off (EPO) interface. Integrated 3-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.OUTPUT
Output Volt Amp Capacity (VA): 2200
Output kVA capacity (kVA): 2.2
Output Watt Capacity (watts): 1920
Output kW capacity: 1.92
Output power factor: 0.87
Output Capacity Details: Output de-rates to 1800w at 110V and 1670w at 100V nominal settings
Nominal Output Voltage(s) Supported: 100V 110V 120V
Nominal Voltage details: 120V default (voltage selection via back panel dipswitches)
Frequency compatibility :50 / 60 Hz
Frequency compatibility details: Supports 60Hz at 110V and 120V nominal and 50/60Hz (auto-sensing) at 100V nominal.
Output voltage regulation (line mode): -14%, +6%
Output voltage regulation (Battery mode): +/- 5%
Built-in UPS output receptacles: 4 x 5-15R outlet(s) 4 x 5-15/20R outlet(s)
Built-in controllable switched load banks: Three switchable single-outlet 5-15R load banks
Basic PDU options: PDU1220 (1U / 13 5-15/20R outlets) PDUNV (1U / 2 C19, 12 C13 outlets) PDUV20 (0U / 12 5-15/20R outlets) PDU40TDUAL (0U / 40 5-15/20R outlets)
Metered PDU options: PDUMH20 (1U / 13 5-15/20R outlets) PDUMH20AT (1U / 16 5-15/20R outlets) PDUMV20 (0U / 16 5-15/20R outlets) PDUMV40 (0U / 32 5-15/20R outlets)
Switched PDU options: PDUMH20ATNET (1U / 16 5-15/20R outlets) PDUMV20NET (0U / 24 5-15/20R outlets)
External PDU redundancy options: Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only
Output AC waveform (AC mode): Sine wave
Output AC waveform (battery mode): Sine wave
INPUT
Rated input current (at maximum load) :16A (120V), 16.4A (110V), 16.7A (100V)
Nominal Input Voltage(s) Supported :100V AC 110V AC 120V AC
UPS input connection type: 5-20P
Input circuit breake:r 20A
UPS Input cord length (ft.): 10
UPS Input cord length (m) :3
Recommended Electrical Service :20A 120V
BATTERY
Full load runtime (minutes): 5 min. (1920w)
Half load runtime (minutes): 13 min. (960w)
DC system voltage (VDC): 48
Battery recharge rate (included batteries) :Less than 4.5 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement): RBC94-2U
Battery Access: Front panel battery access door
Battery replacement description :Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage correction: Voltage reduction of 12% applies when input is between 127 and 145 (120V), 116 and 133 (110V), 106 and 121 (100V)
Undervoltage correction: Voltage boost of 12% applies when input voltage is between 96 and 108 (120V), 87 and 99 (110V), 83 and 90 (100V)
Severe undervoltage correction: Voltage boost of 24% applies when input voltage is between 83 and 95 (120V only)
LEDS ALARMS SWITCHES
LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms: Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation: Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-sound to indicate low-battery status
Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation rear panel protected switches support nominal voltage selection
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating: 570
UPS AC suppression response time: Instantaneous
EMI / RFI AC noise suppression :Yes
PHYSICAL
Installation form factors supported with included accessories: 4 post 19 inch rackmount (mounting rail kit included)
Installation form factors supported with optional accessories: 2 post rackmount (2POSTRMKITWM) Wallmount (2POSTRMKITWM) Tower (2-9USTAND)
Primary form factor: Rackmount
UPS / Power Module dimensions in primary form factor (height x width x depth / inches): 3.5 x 17.5 x 19
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) :8.9 x 44.4 x 48.3
Installed whole system total rack space height (rack spaces): 2U
Secondary form factor: Tower (requires 2-9USTAND)
Installed whole system dimensions in secondary form factor (height x width x depth / inches): 17.5 x 3.5 x 19
UPS dimensions in secondary form factor (height x width x depth / cm): 44.4 x 8.9 x 48.3
UPS / Power Module weight (lbs) :64
UPS / Power Module weight (kg): 29.1
UPS Shipping dimensions (height x width x depth / inches): 9 x 23.5 x 20
UPS Shipping dimensions (height x width x depth / cm) :22.9 x 59.7 x 50.8
Shipping weight (lbs) :72
Shipping weight (kg) :32.7
UPS housing material :Steel
Cooling method :Fan
COMMUNICATIONS
Communications interface: USB (HID enabled) DB9 Serial EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description :Supports detailed monitoring of UPS and site power conditions
PowerAlert software: Included
Communications cable: USB and DB9 cabling included
WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time :2-4 milliseconds
Low voltage transfer to battery power (setpoint) :83 (120V), 87 (110V), 83 (100V)
High voltage transfer to battery power (setpoint): 145 (120V), 133 (110V), 121 (100V)
CERTIFICATIONS
UPS Certifications :Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category A (EMI) ROHS (Reduction of Hazardous Substances)