Beach Audio RSS Feed for Mobile Electronics / Car Amplifiers

Pyle Red Elite Pla3000d 1-channel Car Amplifier - 1 Channel(s) - 2400w - Class D - 90db Snr

Mon, 09 Nov 2009 14:29:51 -0800

]]>* mono block subwoofer amplifier
* rms power @ 4 ohms: 400 w
* rms power @ 2 ohms: 800 w
* rms power @ 1.3 ohms: 1200 w
* maximum power output 2400 w mono
* 1 ohm stable
* mosfet power supply
* pwm (pulse-width-modulation) system
* glass epoxy pcb
* gold plated rca inputs
* custom terminal block for speaker connection
* thermal protection
* overload protection
* short circuit protection
* variable subsonic filter (15hz-40hz, 24db/octave)
* phase control 0-180 degree
* remote bass control (included)
* input impedance: 10k ohms
* soft turn on/off
* advanced protection circuitry
* s/n ratio: > 90db
* heavy duty power coated heatsink
* dimensions:10.9'' (w) x 2.7'' (h) x 15'' (l)
]]>

Rockford Fosgate Punch P3002 2-channel Car Amplifier - 2 Channel(s) - 300w - Class Ab

Thu, 05 Nov 2009 23:37:58 -0800

]]>

Rockford Fosgate's P3002 is a very capable amplifier for a variety of install situations. A superb choice whether you're looking to power coaxials, components or a four-ohm SVC subwoofer.

]]>

Boss Audio Cx2000m Chaos Exxtreme Class D Mono 2000 Watt Amplifier

Thu, 06 Aug 2009 03:36:06 -0700

]]>

Remote subwoofer level control, Line and speaker level inputs and variable gain control

Variable lowpass crossover, phase shift selector, power and protection LEDs

Max power 1-ohm, max power 2-ohm 2000W x 1, RMS power 4-ohm 500W x 1

Max bridged power 4-ohm, signal-to-noise ratio > 105dB, THD 0.01%

0-+18dB variable bass boost, MOSFET power supply

11 7/8" W x 2 5/8" H x 16 13/16" L
]]>

Bazooka Mc-hd-amk Harley Davidson 4-channel Motorcycle Amplifier Kit

Thu, 30 Jul 2009 23:19:26 -0700

]]>Already upgraded your speakers, but still not enough?

The new bazooka motorcycle amp kit includes our fast-hd plug and play interface cable with oem connectors that plug directly into the factory harley davidson harness, and our 4 channel 200w amplifier. This allows for seamless integration of the amplifier into the harley system and maintains full use of all factory handle bar controls. The amplifier easily mounts under the front faring on top of the factory harley radio. (removal of the front faring cover is required)

The mc-hd-amk motorcycle amp kit works on all flh harley models from 1985 to present for harley flh models:
flh electra glide
flh standard
flh classic
flh ultra classic flh x street glide
fltr road glide

known exceptions: this product will not work on 1997 classic and ultra classic bikes with a built-in cb radio, 1999 ultra classic with a built-in cb radio, 2004 electra glide, 2002 electra glide or electra glide ultra classic with a buillt in cb radio, or 2003-2004 ultra glide with a built in cb radio.

before purchasing this product, all bikes make sure the head unit will accept one 35 pin and one 23 pin connector and, all bikes with a built in cb radio should be measured for clearance under the faring.

includes auxiliary output plug for an optional amplified bta6100 bazooka bass tube subwoofer that can be installed into the trunk. (bta6100 and fast-hd-sik subwoofer installation kit sold separately)

this amp kit is 2 ohm stable and works with any brand of speakers whether 2 ohm or 4 ohm
]]>

Legacy Car Audio La120 2-channel Car Amplifier

Thu, 16 Jul 2009 08:37:40 -0700

]]>* maximum power 2 x 120 watts total output
* variable gain control
* accepts high or low impedance inputs
* gold plated rca inputs
* high/low level input
* output impedance: 4-8 ohms
* easy access speaker connections
* remote turn on/off
* adjustable gain control
* load dump over voltage thermal shutdown ac/dc short circuit protector
* heavy duty aluminum alloy heatsink
* power on led indicator
* frequency response: 20-30khz
* signal to noise ratio: 85db
* dimensions: 7 1/8''w x 2''h x 5 1/4''l
]]>

Lanzar Vibe411 4-channel Car Amplifier - 4 Channel(s) - 600w - 90db Snr

Wed, 15 Jul 2009 23:24:35 -0700

]]>* 4 x 75 watts rms @ 4 ohms
* 4 x 150 watts max @ 4 ohms
* 2 x 300 watts max @ 4 ohms bridged
* 4 x 125 watts @ 2 ohms rms
* mosfet automatically switches to maintain rated power over a wide range of battery voltages
* stiffly regulated pwm-type power supplies
* variable input level controls for each pair of cannels
* variable high low pass crossover controls
* high-efficiency, heavy aluminum heatsink
* remote subwoofer bass control
* electronic crossover network
* line outs for 1/2 3/4 channels
* bass boost circuit
* bridgeable at 4 ohms
* 2 ohm stereo stable
* tri-mode capable
* gold rca inputs
* power protection led indicators
* advanced protection circuitry
* soft turn on/off
* frequency response: 15 hz-35 khz
* s/n ratio: 90 db
* fuse: 15a x 2
* dimensions: 10.25''w x 2''h x 12''l
]]>

Lanzar Vibe236 Viberant 2 Channel 1000 Watts High Power Mosfet Amplifier

Wed, 15 Jul 2009 23:24:35 -0700

]]>* 2 x 250w rms at 4 ohms 2 x 500w max at 4 ohms
* 1 x 1000w max at 4 ohms bridged 2 x 400w at 2 ohms rms
* electronic crossover network
* bass boost circuit
* 2 ohms stereo stable
* anti-thump turn-on
* illuminated top panel
* soft turn on/off
* high low level inputs
* power protection led indicators
* advanced protection circuitry
* remote control bass booster
* thd: < 0.04%
* s/n ratio: >90db
* channel separation: >65db
* freq. Response: 15hz~35khz
* dimensions: 11.06''w x 2.24''h x 12''
]]>

Lanzar Opti4000d Optidrive 4000 Watt Mono Block Digital Competition Class Amplifier

Wed, 15 Jul 2009 23:22:40 -0700

]]>* 1 x 2000 watts rms @ 4 ohms
* 1 x 3000 watts max @ 2 ohms
* 1 x 4000 watts rms @ 1 ohm
* mono block subwoofer big power amplifier
* 1 ohm stable
* mosfet power supply
* pwm(pulse-width-modulated) system
* glass epoxy pcb
* gold plated rca inputs
* gold plated line outs
* custom terminal block for speaker connections
* thermal,overload short protection
* variable low pass filter (50hz~150hz,24db/octave)
* variable subsonic filter (15hz~40hz,24db/octave)
* phase control 0-180 degree
* remote bass control
* input impedance:10k ohms
* soft turn on/off
* thd: 0.1%.
* s/n ratio: 90b
* input sensitivity: 200mv~4v
* freq. Response: 20hz~250hz
* dimensions :10.08'' (w) x 2.12'' (h) x 23.3'' (l)
]]>

Lanzar Opti2000d Optidrive 2000 Watt Half Ohm Stable Mono Block Digital Competition Class Amplifier

Wed, 15 Jul 2009 23:22:40 -0700

]]>* 700 watts rms power @ 4 ohms
* 1100 watts rms power @ 2 ohms
* 1600 watts rms power @ 1.3 ohms
* 2000 watts max power @ 0.5 ohms
* 4000 watts bridge max power @ 2 ohms
* mono block subwoofer amplifier
* 0.5 ohm stable
* mosfet power supply
* pwm (pulse-width-modulated) system
* double sided epoxy pcb circuit board
* gold plated rca inputs
* custom terminal block for speaker connections
* thermal, overload short protection
* remote bass control
* soft turn on/off
* thd @ 1watt/4 ohm: 0.1%
* s/n ratio: 90db
* frequency response: 15hz - 150hz (+/-3db)
* damping factor @ 20hz/4 ohms: 400
* low pass filter: 50hz-150hz, 24db/octave
* variable subsonic filter: 15hz-40hz, 24db/octave
* variable bass boost: 0 to 18db
* variable phase control: 0 to 180
* input sensitivity: 200mv ~ 8v
* input impedance: 10k ohm
* line output impedance: 100 ohm
* fuse rating: 30a x 6
* dimensions: 10.08'' (w) x 2.12'' (h) x 19.1'' (l)
]]>

Lanzar Mxa422 4-channel Car Amplifier - 4 Channel(s) - 2000w - 90db Snr

Wed, 15 Jul 2009 23:22:33 -0700

]]>* 4 x 250 watts rms at 4 ohms
* 4 x 500 watts max at 4 ohms
* 2 x 1000 watts max at 4 ohms bridged
* 4 x 450 watts at 2 ohms rms
* electronic crossover network
* bass boost circuit
* variable phase shift control
* 2 ohms stereo stable
* anti-thump turn-on
* tri-mode configurable
* soft turn on/off
* high low level inputs
* blue light illuminated crossover control
* power protection led indicators
* advanced protection circuitry
* bass boost remote control
* t.H.D: <0.04%
* s/n ratio: >90db
* channel separation: >65db
* frequency response: 15hz- 35khz
* dimensions: 10.47''w x 2.46''h x 17''l
]]>

Lanzar Mxa412 4-channel Car Amplifier - 4 Channel(s) - 1000w - 90db Snr

Wed, 15 Jul 2009 23:22:33 -0700

]]>* 4 x 125 watts rms at 4 ohms
* 4 x 250 watts max at 4 ohms
* 2 x 500 watts max at 4 ohms bridged
* 4 x 200 watts at 2 ohms rms
* electronic crossover network
* bass boost circuit
* variable phase shift control
* 2 ohms stereo stable
* anti-thump turn-on
* tri-mode configurable
* soft turn on/off
* high low level inputs
* blue light illuminated crossover control
* power protection led indicators
* advanced protection circuitry
* bass boost remote control
* t.H.D: <0.04%
* s/n ratio: >90db
* channel separation: >65db
* frequency response: 15hz- 35khz
* dimensions: 10.47''w x 2.46''h x 12''l
]]>

Lanzar Htg2600d Heritage 2000 Watt Mono Block Digital Amplifier

Wed, 15 Jul 2009 23:21:21 -0700

]]>* 1 x 400w rms @ 4 ohms
* 1 x 800w rms @ 2 ohms
* 1 x 1000w rms @ 1.3 ohms
* 1 x 2000w @ 1.3 ohms
* 1 x 4000w bridged max power @ 2 ohms
* mono block subwoofer amplifier
* 1 ohm stable
* mosfet power supply
* pwm(pulse-width-modulated) system
* glass epoxy pcb w/smd technology
* gold plated rca inputs
* custom terminal block for speaker connections
* thermal, overload short protection
* variable subsonic filter(15hz~40hz,24db/octave)
* phase control 0-180 degree
* input impedance:10k ohms
* soft turn on/off
* heavy duty power coated heatsink
* thd: 0.1%
* s/n ratio: 90db
* input sensitivity: 200mv~8v
* freq. Response: 10hz~150khz
* remote bass control
* fuse: 30a x 4
* dimensions: 9.82''(w) x 2.34''(h) x 15.16''(l)
]]>

Lanzar Htg254 2-channel Car Amplifier - 2 Channel(s) - 1600w - 90db Snr

Wed, 15 Jul 2009 23:21:21 -0700

]]>* 2x400w rms at 4 ohms 2x800w max at 4 ohms * 1x1600w max at 4 ohms bridged 2x650w rms at 2 ohms * electronic crossover network * bass boost circuit * bridgeable at 4 ohms * 2 ohm stereo stable * gold rca inputs * line outs for left & right channel * low pass filter controls * high pass filter controls * power & protection led indicators * soft turn-on/turn-off * thd: 90db * channel separation: >65db * freq. Response: 10hz~35khz * subwoofer remote level control * dimensions: 9.82''(w) x 2.34''(h) x 17.83''(l)
]]>

Lanzar Htg244 2-channel Car Amplifier - 2 Channel(s) - 1000w - 90db Snr

Wed, 15 Jul 2009 23:21:20 -0700

]]>* 2 x 250w rms @ 4 ohms
* 2 x 500w max @ 4 ohms
* 1 x 1000w max @ 4 ohms bridged
* 2 x 420w rms @ 2 ohms
* electronic crossover network
* bass boost circuit
* bridgeable at 4 ohms
* 2 ohm stereo stable
* gold rca inputs
* line outs for left & right channel
* low pass filter controls
* high pass filter controls
* power & protection led indicators
* soft turn-on/turn-off
* thd 0.04%. S/n ratio: 90db
* channel separation: 5db
* freq. Response: 10hz~35khz
* subwoofer remote level control
* fuse: 20a x 2
* dimensions: 9.82''(w) x 2.34''(h) x 13.46''(l)
]]>

Lanzar Htg234 2-channel Car Amplifier - 2 Channel(s) - 800w - 90db Snr

Wed, 15 Jul 2009 23:21:20 -0700

]]>* 2x200w rms at 4 ohms 2x400w max at 4 ohms * 1x800w max at 4 ohms bridged 2x350w rms at 2 ohms * electronic crossover network * bass boost circuit * bridgeable at 4 ohms * 2 ohm stereo stable * gold rca inputs * line outs for left & right channel * low pass filter controls * high pass filter controls * power & protection led indicators * soft turn-on/turn-off * thd: 90db * channel separation: >65db * freq. Response: 10hz~35khz * subwoofer remote level control * dimensions: 9.82''(w) x 2.34''(h) x 9.92''(l)
]]>

Lanzar Htg224 2-channel Car Amplifier - 2 Channel(s) - 600w - 90db Snr

Wed, 15 Jul 2009 23:21:20 -0700

]]>* 2x150w rms at 4 ohms 2x300w max at 4 ohms * 1x600w max at 4 ohms bridged 2x250w rms at 2 ohms * electronic crossover network * bass boost circuit * bridgeable at 4 ohms * 2 ohm stereo stable * gold rca inputs * line outs for left & right channel * low pass filter controls * high pass filter controls * power & protection led indicators * soft turn-on/turn-off * thd: 90db * channel separation: >65db * freq. Response: 10hz~35khz * subwoofer remote level control * dimensions: 9.82''(w) x 2.34''(h) x 8.27''(l)
]]>

Rockford Fosgate R300-4 Prime 300 Watt 4-channel Mosfet Auto Amplifier

Wed, 15 Jul 2009 18:00:55 -0700

]]>

Rockford Fosgate amplification at an unbelievable value. The R300-4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done!

]]>

Rockford Fosgate R1502 Prime 150 Watt 2-channel Mosfet Auto Amplifier

Wed, 15 Jul 2009 18:00:41 -0700

]]>

Rockford fosgate amplification at an unbelievable value. The r150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single r1s410 10" or r1s412 12" woofer.

12db/octave crossover

4 gauge power/ground connections w/built-in atc fusing

mosfet output stage

mosfet power supply

rca pass-thru

cea-2006 compliant

number of channels 2

rated power

continuous power 50 watts rms x 2 @ 4-ohms

75 watts rms x 2 @ 2-ohms

150 watts rms x 1 @ 4-ohms bridged/mono

total power

total sum of 'rated power' 150 watts

dynamic power

powercube measurement (info) 57 watts x 2 @ 4-ohms 0 res

85 watts x 2 @ 2-ohms 0 res

bridgeable yes

efficiency (average) 60% @ 4-ohm

54% @ 2-ohm

crossover controls high-pass (hp): 80hz @ 12db/octave butterworth

low-pass (lp): 50hz-250hz @ 12db/octave butterworth

tone controls punch bass: 0db to +12db @ 45hz

signal input low level: 1 rca pair

signal output low level: 1 rca pair

power input connector screw terminal barrier strip

power wire gauge 4 awg

speaker output connector screw terminal barrier strip

speaker wire gauge 8 awg

heat sink type extruded aluminum

cooling convection

remote controls n/a

visual indicators power

protect

circuit topology class class a/b

frequency response 20hz to 20khz +/-1db

shipping weight tba lbs. (tba kg.)

dimensions (hxwxl) 2.40 x 7.67 x 11.54 (in)

6.10 x 19.49 x 29.30 (cm)
]]>

Boss Audio Cx800 Chaos Exxtreme 4-channel Mosfet Bridgeable Power Amplifier (1600w)

Wed, 15 Jul 2009 17:58:18 -0700

]]>

Trimode operation

Bridgeable

Remote subwoofer level control

Line & speaker level inputs

Variable gain control

Power & protection leds

Variable low pass crossover

High pass crossover

0+18 db variable bass boost

Mosfet power supply

Signal-to-noise ratio: 102 db

Thd at rms output: 0.01%

150w rms X 4 @ 4_

400w max X 4 @ 2_

800w max bridged X 2 @ 4_

Dim: 16.81"l X 11.88"w X 2.63"h
]]>

Rockford Fosgate P400-4 400 Watt 4-channel Amplifier W/top Mounted Led Indicators

Wed, 15 Jul 2009 17:58:10 -0700

]]>

12db/octave crossover

2/4 channel switch

4 gauge power/ground terminals

audiophile grade speaker connections

mosfet output stage

mosfet power supply

top mounted led indicators

the p400-4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels & subs on the rear & boom - you got "the punch." w/its flexible design, the p400-4 is an excellent amplifier choice for virtually any vehicle.

cea-2006 compliant

number of channels 4

rated power: continuous power 50w x 4 @ 4-ohms rms

100w x 4 @ 2-ohms rms

200w x 2 @ 4-ohms bridged rms

total power; total sum of 'rated power' 400 watts

dynamic power: powercube measurement (info) 86 watts x 2 @ 4-ohms 0 res front

85 watts x 2 @ 4-ohms 0 res rear

144 watts x 2 @ 2-ohms 0 res front

142 watts x 2 @ 2-ohms 0 res rear

efficiency (average) 71% @ 4-ohm

70% @ 2-ohm

crossover controls front high-pass (hp): 50hz-500hz 12db/octave butterworth

front low-pass (lp): 50-500hz 12db/octave butterworth

rear high-pass (hp): 50hz-500hz 12db/octave butterworth

rear low-pass (lp): 50-500hz 12db/octave butterworth

tone controls front punch eq2 bass: 0db to +18db @ 45hz and/or

front punch eq2 treble: 0db to +12db @ 12khz

rear punch eq2 bass: 0db to +18db @ 45hz and/or

rear punch eq2 treble: 0db to +12db @ 12khz

function depends upon lp/ap/hp switch position

signal input low level: 2 rca pair

power input connector block

power wire gauge 4 awg

speaker output connector screw terminal barrier strip

speaker wire gauge 8 awg to 18 awg

heat sink type cast aluminum

cooling convection

remote controls optional peq remote punch eq; (overrides built-in punch eq2 for rear channels only)

visual indicators power

thermal protect

circuit topology class class a/b

frequency response 20hz to 20khz +/- 1.0db

dimensions (hxwxl) 2.25 x 7.625 x 13.02 (in); 5.71 x 19.37 x 33.07 (cm)
]]>