Beach Audio RSS Feed for Kicker

Kicker 06km10 Subwoofer Woofer - 150w (rms)

Mon, 03 Aug 2009 19:36:30 -0700

]]>* nominal size (in., cm) 10, 25
* impedance (ohms) 4
* max rec amplifier power (watts peak/rms)* 300/150
* sensitivity (db 1w/1m) 86.5
* frequency response (hz) 30-500
* frequency response, + 0 / - 1 db 20 hz - 200 hz
* mounting depth (in., cm) 5-1/4, 13.2
* mounting hole diameter (in., cm) 9-5/16, 23.5

the km10 marine subwoofer provides 10 inches of bass that blows the competition away. W/a crank of the volume knob, the km10 has the ability to go deep really deep.

the km10 rocks from either a sealed or vented box (150 watts rms power handling), while remaining extremely durable in any outdoor climate. The subs sealed motor, cone, & locking terminal cover make it entirely splash- & spray-resistant. The water-tight terminal cover itself provides strain relief, insulation, corrosion prevention, & aids in ignition protection.

the state-of-the-art, injection-molded cone, santoprene surround, basket, & grille are uv-treated to combat the harsh marine environment. A water-resistant, bolt-thru grille offers further protection, & has a tough look & popular metallic color that matches well w/all interiors. All hardware is made from corrosion-proof, 316l stainless-steel. The km10 meets or exceeds industry standards for environmental humidity & corrosion* & for material degradation due to uv exposure.

additionally, the km10 is engineered w/the highest level of magnetic shielding available, minimizing compass & gauge deviation in the boats dash & preventing navigational complications.

kicker is a member of the american boat & yacht council (abyc), a leader in education for the marine industry, & the national marine manufacturers association (nmma), which supports the u.S. Recreational boating industry.
]]>

Kicker 05ks20 Tweeter - Passive Tweeter - 95w (rms) / 190w (pmpo)

Wed, 15 Jul 2009 17:46:48 -0700

]]>* outboard crossover included
* speaker wire included
* high pass, db, at frequency, hz 12, 4500
* grills included yes
* speaker design high frequency transducer
* rated impedance, ohm 4
* dc resistance, ohm 3
* sensitivity [splo], db @ 1w, 1m 92
* resonance frequency [fo], hz 1770
* power range, watts rms jun-95
* peak power handling, watts 190
* effective frequency range, hz 4500-21k
* top-mount depth, in (cm) 9/16 (1.4)
* mounting hole diameter, in (cm) 1 9/16 (3.98)
* frame diameter, in (cm) 1 31/32 (5.0)
* overall depth, in (cm) 27/32 (2.15)
* tweeter size, in (cm) 3/4 (2.0)
* tweeter design dome
* tweeter diaphragm material titanium
* tweeter magnet material neodymium

titanium dome tweeter w/neodymium magnet
featured in the ks20 provides a polished high frequency
response w/agile, meticulous & spatially-correct imaging.
]]>

Kicker 06km620 Coaxial Speaker - 2-way Speaker - 65w (rms) / 195w (pmpo)

Wed, 15 Jul 2009 17:45:19 -0700

]]>Your km coaxials were specially designed for livin loud out in the harsh marine
environment. They are magnetically shielded & use advanced materials & construction
techniques to maintain optimal performance for years to come.
* woofer size, in (cm) 6 (16)
* tweeter size, in (cm) 3/4 (2.0)
* dome material titanium
* nominal impedance [zn], ohm 4
* power handling watts, peak (rms) 195 (65)
* sensitivity [splo], db @ 1w, 1m 90
* effective frequency range, hz 35-21k
* mounting hole diameter, in (cm) 5 1/8 (13)
* mounting depth, in (cm) 2 7/8 (7.2)
* bolt-thru grilles yes
]]>

Kicker 06zx1002 2 Channel Auto Amplifer - 50 Watts X 2 W/bass Boost

Wed, 15 Jul 2009 17:41:58 -0700

]]>Your kicker zx.2 series amplifier has two rotary controls & one switch on the end panel. These
controls ensure the reliability & performance of the amplifier. Before turning on the system for the first
time, turn the two rotary controls on the side of the amplifier to the full counter-clockwise position.
* rms power in watts, all channels driven
1. Crossoverswitch the crossover switch on the end-panel is for setting the internal crossover. In
the off position the amplifier passes a full-range signal to the speakers. Use the lo position when
connected to a subwoofer. The hi position should be selected when
connected to speakers, which you do not want to receive any sub-bass
information. Never change the crossover "off/hi/lo" switch
setting w/the audio system on!
2. Inputgaincontrol the input gain control is not a volume control. It matches the output of the source unit to the input level of the amplifier. Turn the source unit up to about 3/4 volume (if the source unit goes to 30, turn it to 25).
next, slowly turn (clockwise) the gain on the amplifier up until you can hear audible distortion, then
turn it down a little.
3. Bassboostcontrol the bass boost control is designed to give you increased output 0 - 12db
at 40 hz. The setting for this control is subjective. If you turn it up, you must go back & adjust the
input gain control to avoid clipping the amplifier.
* @ 14.4 volts, 4-ohms stereo, . 1% thd+n 35 x 2
* @ 2-ohms stereo, . 1% thd+n 50 x 2
* @ 4-ohms mono, . 1% thd+n 100
* frequency response, "} 0.5 db: 20 hz - 20 khz
* signal-to-noise ratio: >95 db, a-weighted, re: rated power
* input sensitivity: 125 mv - 5 v low level
* 250 mv - 10 v high level
* electronic crossover: hi, lo or off (bypass),
* fixed @ 80 hz, 12 db per octave
* bass boost: variable 0 to +12 db boost @ 40 hz
* height: 2 1/8"h (54mm)
* width: 9 5/8"h (244mm)
* length: 8 1/4"h (209mm)
]]>

Kicker 06zx2502 Zx250.2 Amplifer - 125 Watts X 2

Wed, 15 Jul 2009 17:37:44 -0700

]]>* rms power in watts, all channels driven
* @ 14.4 volts, 4-ohms stereo, <= 1% thd+n 85 x 2
* @ 2-ohms stereo, <= 1% thd+n 125 x 2
* @ 4-ohms mono, <= 1% thd+n 250
* length: 13 1/2 (342mm)
* height: 2 1/8 (54mm)
* width: 9 5/8 (244mm)
* frequency response, 0.5 db: 20 hz - 20 khz
* signal-to-noise ratio: 95 db, a-weighted, re: rated power
* input sensitivity: 125 mv - 5 v low level, 250 mv - 10 v high level
* electronic crossover: variable hi, lo or off (bypass), 50 - 200hz, 12db per octave
* bass boost: variable 0 to +18 db boost @ 40 hz
]]>

Kicker Zx550.3 3-channel Car Amplifier - 3 Channel(s) - Class D - 95db Snr

Wed, 15 Jul 2009 17:33:48 -0700

]]>* rms power in watts, amp 1 & amp 2 all channels driven
* @14.4v, 4-ohms stereo <=1% thd+n 70 x 2
* @14.4v, 2-ohms stereo, <=1% thd+n 85 x 2
* @14.4v, 4-ohms mono, <=1% thd+n n/a
* rms power in watts, subwoofer channel driven
* @14.4v, 4-ohms mono <=1.5% thd+n 210 x 1
* @14.4v, 2-ohms mono, <=1.5% thd+n 420 x 1
* length: 16 3/4 (425mm)
* specifications common to all models:
* height: 2 1/8 (54mm)
* width: 9 5/8 (244mm)
* frequency response, 0.5 db: 20 hz - 20 khz
* signal-to-noise ratio: 95 db, a-weighted, re: rated power
* input sensitivity: 125 mv - 5 v low level, 250 mv - 10 v high level
* electronic crossover: variable (defeatable) hi pass, 50 - 200hz, 12bb per octave, for the full-range channels
variable low pass, 50 - 200hz, 24db per octave, for the subwoofer channel
* bass boost: variable 0 to +18db boost @ 40hz, for the subwoofer channel
]]>

Kicker 05ks13 Ks Component Pen Dome Tweeters - 13mm

Wed, 15 Jul 2009 17:33:47 -0700

]]>* speaker wire: included
* high pass, db, at frequency, hz: 12, 4500
* grills included: yes
* speaker design: high frequency transducer
* rated impedance, ohm: 4
* dc resistance, ohm: 3
* sensitivity [splo], db @ 1w, 1m: 92
* resonance frequency [fo], hz: 2970
* power range, watts rms: jun-75
* peak power handling, watts: 150
* effective frequency range, hz: 4500-21k
* top-mount depth, in (cm): 9/16 (1.4)
* mounting hole diameter, in (cm): 1 9/16 (3.98)
* frame diameter, in (cm): 1 31/32 (5.0)
* overall depth, in (cm): 27/32 (2.15)
* tweeter size, in (cm): 1/2 (1.3)
* tweeter design: dome
* tweeter diaphragm material: pen
* tweeter magnet material: neodymium
* outboard crossover: included

pen dome tweeter w/neodymium magnet
featured in the ks13 provides a silky high frequency response
with quick, precise & spatially-correct imaging. Pen is an
acronym for the space age material biaxially oriented
polypropylene naphthalate film--your parents tax dollars
probably paid for its development, you might as well enjoy it.
]]>

Kicker Zx200.2 2-channel Car Amplifier - 2 Channel(s) - 95db Snr

Wed, 15 Jul 2009 17:18:50 -0700

]]>* rms power in watts, all channels driven
* @ 14.4 volts, 4-ohms stereo, <= 1% thd+n 70 x 2
* @ 2-ohms stereo, <= 1% thd+n 100 x 2
* @ 4-ohms mono, <= 1% thd+n 200
* length: 10 1/4 (260mm)
* height: 2 1/8 (54mm)
* width: 9 5/8 (244mm)
* frequency response, 0.5 db: 20 hz - 20 khz
* signal-to-noise ratio: 95 db, a-weighted, re: rated power
* input sensitivity: 125 mv - 5 v low level, 250 mv - 10 v high level
* electronic crossover: variable hi, lo or off (bypass), 50 - 200hz, 12db per octave
* bass boost: variable 0 to +18 db boost @ 40 hz
]]>

Kicker Z-series Video Interconnect Cable - 6.56ft

Fri, 10 Apr 2009 08:21:10 -0700

]]>

75-ohm video cable

Sheilded flexible-braid center conductor and teflon dielectric stop unwanted picture interference

Hyper-Flex technology that allows the wire to bend, twist or contort
]]>

Kicker Z-series Audio Cable - Rca Audio - 6.56ft

Fri, 10 Apr 2009 08:21:09 -0700

]]>

Cables are constructed of silver-tinned and oxygen-free copper

Uses silver molded ends with gold-plated, sure grip collars and split-center pin

Tactile-grip RCA ends and unique color-coded strain relief identifies front-rear/left-right channel designations
]]>

Kicker Z-series Audio Cable - Rca Audio - 9.84ft

Fri, 10 Apr 2009 08:21:09 -0700

]]>

Cables are constructed of silver-tinned and oxygen-free copper

Uses silver molded ends with gold-plated, sure grip collars and split-center pin

Tactile-grip RCA ends and unique color-coded strain relief identifies front-rear/left-right channel designations
]]>

Kicker Z-series Audio Cable - Rca Audio - 16.4ft

Fri, 10 Apr 2009 08:21:09 -0700

]]>

Cables are constructed of silver-tinned and oxygen-free copper

Uses silver molded ends with gold-plated, sure grip collars and split-center pin

Tactile-grip RCA ends and unique color-coded strain relief identifies front-rear/left-right channel designations
]]>

Kicker Z-series Splitter Audio Cable - 1 X Rca Male Audio - 2 X Rca Female Audio

Fri, 10 Apr 2009 08:21:09 -0700

]]>

Cables are constructed of silver-tinned and oxygen-free copper

Uses silver molded ends with gold-plated, sure grip collars and split-center pin

Tactile-grip RCA ends and unique color-coded strain relief identifies front-rear/left-right channel designations
]]>

Kicker 08ds12l72 Dual 12" 1500-watt Vented Sub Enclosure Loaded With 2 Solo Baric Subwoofers /kit

Thu, 09 Apr 2009 17:21:09 -0700

]]>

Power handling: 1500 watts max x 750 watts RMS

Frequency response: 20Hz-100Hz

Sensitivity: 88dB

High-temperature dual 2 ohms voice coils

Titanium deposit impregnated cone woofer with rolled outer edge

Vented 360 back bracing

Poly-cotton semi-progressive spider

Santoprene rubber surround

Spiralead? tinsel leads

Includes 1-year warranty (subwoofers only)
]]>

Kicker Speaker Cable - 1 X Bare Wire - 1 X Bare Wire - 400ft

Mon, 02 Mar 2009 17:22:38 -0800

]]>

400' in lenght

16-gauge

Virgin-PVC Hyper-Flex insulation and multi-strand construction allows user to bend and contort the cable
]]>

Kicker 07ds6802 6" X 8" / 5" X 7" 2-way Component System

Mon, 02 Mar 2009 17:22:19 -0800

]]>

6" x 8" / 5" x 7" 2-way component system

Power handling 180 watts per set/90 watts each side max 90 watts per set/45 watts each side RMS

Frequency Response: 40Hz-21,000Hz

4000Hz 12dB crossover

4 ohms impedance

3/4 Titanium dome tweeter

3-Level tweeter attenuation circuit

Sensitivity: 90dB

Polypropylene woofer

UV-treated ribbed surround

Neodymium tweeter magnet

1-year warranty
]]>

Kicker Ds5250 Speaker - 2-way Speaker - 35w (rms) / 70w (pmpo)

Mon, 02 Mar 2009 17:22:18 -0800

]]>

Great sounding, easy-to-install midrange and highs make all the difference in your audio system. DS5250 Coaxial Speaker provide the cost-effective ammo to keep up with your bass upgrade. DS5250 Speaker is the best value for serious, drop-in upgrades in your doors. The woofer bear a polypropylene cone, UV-treated ribbed surround, enduring voice coil, and an interior-pleasing fresh look. The half-inch tweeter take the performance cues of higher-end coaxial, using a super-strong neodymium magnet and PEI (polyether imide) dome for louder, better-sounding highs.

]]>

Kicker Kb6000w Speaker - 2-way Speaker - Cable 75w (rms) / 150w (pmpo) - White

Mon, 02 Mar 2009 17:22:17 -0800

]]>

6 1/2" Woofer

2" x 5" compression loaded midrange/tweeter

Power handling 75 watts max

Frequency response 55Hz-21kHz

Used in outdoor applications

Water-resistant molded enclosure

8 1/4" W x 8" H x 11" L

Includes 1-year warranty and rubber feet bookshelf mounting
]]>

Kicker 08gr12 12" Cast Aluminum Subwoofer Grille

Mon, 02 Mar 2009 17:22:17 -0800

]]>

12" aluminum grille enhances the look of your Kicker CompVR, Comp, CompVT 15" subwoofer while protecting it from damage

Diameter from screw hole to screw hole

Distance from one screw hole to a neighboring screw hole

Also fits other 12" round subwoofers with standard hole cutouts

Includes 1-year warranty
]]>

Kicker X-series Speaker Cable - Bare Wire - Bare Wire - 20ft

Mon, 02 Mar 2009 17:22:17 -0800

]]>

12-gauge 20' power wire

Virgin-PVC Ground

Hyper-Flex insulation and multi-strand construction

Easily bend, ultra-flexible

Tightly twisted, silver-tinned OFC copper conductors

Maximum current flow
]]>