Home » Accessories » Power Equipment » Power Injectors/splitters » AIRPWRINJ60RGD1=

Cisco Systems AIR-PWRINJ-60RGD1= Power Injector 60w Outdr 

19 in stock (as of 09/18/2018 02:18 PM)

Shipping Estimate:
Qualifies for FREE Shipping!
Within the Continental USA
Cisco Systems AIR-PWRINJ-60RGD1= Power Injector 60w Outdr
Zoom panel loading...


Cisco Systems
Added to our catalog within last 30 days
Model: AIR-PWRINJ-60RGD1-
View other products from Cisco Systems

$608.39
Estimated Shipping: FREE

Description

Cisco Aironet Power Injector 60W outdoor North America plug

Features

Compatibility: Cisco Aironet 1560 Series Outdoor Access Points

Certifications & Standards: 
  • CE
  • IEEE 802.3af
  • IEEE 802.3at
  • FCC Part 15, Class B
  • CE, EN50522 Class B
  • EN55024
  • VCCI
  • EN61000-4-5 Class 5 (6kV CM)
  • UL60950-1
  • UL60950-22


Environmentally Friendly: Yes

Environmental Certification: RoHS

Environmental Certification: WEEE

Environmental Certification: GS

Specification

General Information
ManufacturerCisco Systems, Inc
Manufacturer Part NumberAIR-PWRINJ-60RGD1=
Manufacturer Website Addresshttp://www.cisco.com
Brand NameCisco
Product LineAironet
Product NameAironet PoE Injector
Marketing Information

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.

Product TypePoE Injector
Technical Information
Protection TypeSurge Protection
Power Description
Input Voltage
Maximum Output Voltage55 V DC
Maximum Output Current2 A
Maximum Output Power60 W
Interfaces/Ports
Input Ports1 Ethernet
Output Ports1 Ethernet
Physical Characteristics
Mount TypePole/Wall-mountable
Height2.8"
Width5.9"
Length8.4"
Weight (Approximate)2.98 lb
Title
ProductTitleCisco Aironet PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 Ethernet Input Port(s) - 1 Ethernet Output Port(s) - 60 W - Pole/Wall-mountable

Warranty Information

Beach Audio Warranty

This product was added to our catalog on Tuesday, September 18, 2018.

Code:2-air-pwrinj-60rgd1-

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved