Home » Computers » Network & Communication » Routing/switching Devices » Switches & Bridges » DGS313030S

Dlink 222522 D-link Nt Dgs-3130-30s Dgs-3130 24pt Managed L3 Gigabit Sfp Swt W... 

1 in stock (as of 08/08/2020 12:08 AM)

Shipping Estimate:

Dlink 222522 D-link Nt Dgs-3130-30s Dgs-3130 24pt Managed L3 Gigabit Sfp Swt W 6x10gbe Ports
Zoom panel loading...


Dlink
Additional Images:   Medium | 900 | 1100
Added to our catalog within last 30 days
Model: 222522
View other products from Dlink

$1,178.86
Estimated Shipping: FREE

Description

Stackable Fully Managed Switch
24 x 100/1000 SFP ports
2 x 10GBASE-T RJ45 ports
4 x 10GbE SFP+ ports
Embedded 6 kV surge protection on all Gigabit Ethernet ports
L3 Features include VRRP, Static Route and RIPv1/v2/ng

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast and enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (PoE) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af and IEEE 802.3at PoE standards. The default power budget for these models is 370 watts and can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB 2.0 port, allowing the user to boot images and upload configuration files directly, as well as conveniently save syslog files to an USB 2.0 storage device.
Enhanced Network Reliability
Comprehensive Security Features
Easy Access Control Policies
Power over Ethernet Support
Versatile Traffic ManagementGeneral
Hardware version is A
- Ports
48 x SFP ports
2 x 10GBASE-T ports
4 x 10G SFP+ ports
- Optional Redundant Power Supply
DPS-500A
- Console Port
10/100/1000BASE-T RJ-45 port for out-of-band CLI management
- Management Port
10/100/1000BASE-T RJ-45 port for out-of-band IP management
Stacking Ports is equal to 4
- Stacking CostNOTE
1
- USB Ports
1 x USB 2.0 Type A port
Performance
- Switching Capacity
168 Gbps
- 64-Byte Packet Forwarding Rate
125 Mpps
- Packet Buffer Memory
2 MB
Physical and Environmental
- MTBF (Hours)
487,153 hours
- Acoustics
Max: 54 dB / Min: 41.1 dB
- Heat Dissipation
281.16 BTU/h
- Power Input
100 to 240 VAC, 50 to 60 Hz
- Max Power Consumption
82.4 W
- Ventilation
3 x Smart fans
- Operation Temperature
0oC to 50oC (32oF to 122oF)
- Storage Temperature
-40oC to 70oC (-40oF to 158oF)
- Operating Humidity
10% to 90% RH
- Storage Humidity
5% to 90% RH
- Emission (EMI)
FCC Class A, CE Class A, VCCI Class A, IC, RCM, BSMI, CCC
- Safety
CB, cUL, BSMI, CCCSoftware Features
Stackability
- Physical stacking:
Stacking Lite
Up to 9 units per stack or up to 12 stacking cost per stackNOTE
- Virtual stacking:
D-Link Single IP Management (SIM)
Up to 32 units per virtual stack
L2 Features
- MAC Address Table: 16K (16,384) entries
- Flow Control:
802.3x Flow Control
HOL Blocking Prevention
- Jumbo Frames up to 9 Kbytes
- 802.3ad Link Aggregation:
Max. 32 groups per device, 8 Gigabit ports per group
- Spanning Tree Protocols:
802.1D STP
802.1w RSTP
802.1s MSTP
BPDU Filtering
Root Restriction
- Loopback Detection
- Port Mirroring:
One-to-One
Many-to-One
Flow-based
RSPAN Mirroring
- Ethernet Ring Protection Switching (ERPS):
Single ring topology
L2 Multicasting
- IGMP Snooping:
IGMP v1/v2/v3 Snooping
Supports 1024 IGMP groups
Port/Host-based IGMP Snooping Fast Leave
- Limited IP Multicast:
Up to 24 IGMP filtering profiles, 128 ranges per profile
- Double VLAN Q-in-Q:
Port-based Q-in-Q
Selective Q-in-Q
- MLD Snooping:
MLD v1/v2 Snooping
Support 1024 MLD Groups
Host-based MLD Snooping Fast Leave
VLAN
- VLAN Group:
Max. 4K VLAN groups
- GVRP:
Max. 4K dynamic VLAN groups
- 802.1Q Tagged VLAN
- Port-based VLAN
- 802.1v Protocol VLAN
- Voice VLAN
- MAC-based VLAN
- VLAN translation
- ISM VLAN
- Asymmetric VLAN
- Private VLAN
- VLAN Trunking
- Super VLAN
QoS (Quality of Service)
- 802.1p
- 8 queues per port
- Queue Handling:
Strict Priority
Weighted Round Robin (WRR)
Strict + WRR
- Supports following actions for flows:
Remark 802.1p Priority Tag
Remark TOS/DSCP Tag
Bandwidth Control
- CoS based on:
Switch port
VLAN ID
802.1p priority queues
MAC address
IPv4 address
DSCP
Protocol type
TCP/UDP port
User-defined packet content
IPv6 address
IPv6 traffic class
IPv6 flow label
- Bandwidth Control:
Port-based (ingress/egress, min. granularity 8 Kbps)
Flow-based (ingress/egress, min. granularity 8 Kbps)
- Three Color Marker:
CIR/PIR minimum granularity: 8 kbps
Two Rate Three Color Marker (trTCM), CBS/PBS
Single Rate Three Color Marker (srTCM), CBS/EBS
Access Control List (ACL)
- ACL based on:
802.1p priority
VLAN ID
MAC address
Ether Type
IPv4 address
DSCP
Protocol type
TCP/UDP port number
User-defined packet content
IPv6 address
IPv6 flow label
IPv6 traffic class
- Supports up to 2048 ingress access entries
- Supports up to 512 egress access entries
- Time-based ACL
- CPU Interface Filtering
Security Features
- SSH v2
- SSL v1/v2/v3
- Port Security:
Up to 64 MAC addresses per port
- IP-MAC Port Binding
- DHCP Snooping
- Supports up to 500 address binding entries
- Broadcast/Multicast/Unicast Storm Control
- Traffic segmentation
- D-Link Safeguard Engine
- NetBIOS/NetBEUI Filtering
- IPv6 ND Snooping
- DHCP Server Screening
- ARP Spoofing Prevention
- DoS Attack Prevention
- BPDU Attack Protection
- ARP Packet Inspection
- IP Packet Inspection
AAA
- 802.1X:
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
- Web-based Access Control (WAC):
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
- MAC-based Access Control (MAC):
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
- Guest VLAN
- Microsoft NAP:
Support 802.1X NAP
Support DHCP NAP
- RADIUS Accounting
- RADIUS and TACACS+ authentication for switch access
- Four levels of User Account Control
Green Features
- Compliant with RoHS
- Power saving by Link Status
- Power saving by cable length
- Time-based PoE
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
OAM
- Cable diagnostics
- Hardware-based Dying Gasp
- 802.3ah Ethernet Link OAM
Management
- Web-based GUI
- Command Line Interface (CLI)
- Telnet Server
- Telnet Client
- TFTP Client
- DNS Client
- Secure FTP Server
- ZModem
- SNMP v1/v2c/v3
- SNMP Traps
- System Log
- sFlow
- Multiple images Multiple Configurations
- RMON v1:
Supports 1,2,3,9 groups
- RMON v2:
Supports ProbeConfig group
- LLDP
- BootP/DHCP Client
- DHCP Auto-Configuration
- DHCP Relay
- DHCP Client Option 12
- DHCP Relay Option 18, 37, 82
- Flash File System
- PPPoE Circuit-ID Tag Insertion CPU monitoring
- Debug command
- SNTP
- NTP
- Password recovery
- Password encryption
- Trusted Host
- ICMPv6
- DHCP server
L3 Features
- Max. 16 IP interfaces
- ARP Proxy
- IPv6 Neighbour Discovery (ND)
- VRRP
L3 Routing
- Static Route:
Max. 512 IPv4 entries
Max. 512 IPv6 entries
- RIPv1/v2/ng
L3 Multicasting
- IGMP Filtering:
Port-based filtering
VLAN-based filtering
MIB
- RFC 1213 MIB II
- RFC 4188 Bridge MIB
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1907 SNMPv2 MIB
- RFC 1757, 2819 RMON MIB
- RFC 2021 RMONv2 MIB
- RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
- RFC 2674 802.1p MIB RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 2620 RADIUS Accounting Client MIB
- RFC 2925 PING TRACEROUTE MIB
- RFC 2674, 4363 802.1p MIB
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1215 MIB Traps Convention
- RFC 1212 Concise MIB Definitions
- RFC 1215 MIB Traps Convention
- RFC 1157, 2571-2576 SNMP MIB
- RFC 4022 MIB for TCP
- RFC 4113 MIB for UDP
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- RFC 2737 Entity MIB (version 2)
RFC Standard Compliance
- RFC 768 UDP
- RFC 791 IP
- RFC 792, 2463, 4443 ICMP
- RFC 793 TCP
- RFC 826 ARP
- RFC 3513, 4291, IPv6 Addressing Architecture
- RFC 2893, 4213 IPv4/IPv6 dual stack function
- RFC 2463, 4443 ICMPv6
- RFC 2462, 4862 IPv6 Stateless Address Auto Configuration
- RFC 2464 IPv6 Ethernet and definition
- RFC 1981 Path MTU Discovery for IPv6
- RFC 2460 IPv6
- RFC 2461, 4861 Neighbor Discovery for IPv6
- RFC 783 TFTP
- RFC 2068 HTTP
- RFC 1492 TACACS
- RFC 2866 RADIUS Accounting
- RFC 2474, 3260 DiffServ
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 2571, 2572, 2573, 2574, SNMP
- RFC 854 Telnet
- RFC 951, 1542 BootP
Ordering Information
24 10/100/1000BASE-T ports, 2 10GBASE-T ports, and 4 10G SFP+ port Lite L3 Stackable Managed Switch

Specification

General Information
ManufacturerD-Link Systems, Inc
Manufacturer Part NumberDGS-3130-30S
Manufacturer Website Addresshttp://www.dlink.com
Brand NameD-Link
Product SeriesDGS-3130
Product ModelDGS-3130-30S
Product NameDGS-3130-30S Ethernet Switch
Marketing Information

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, and enhanced security, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provides 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provides 24 or 48 10/100/1000 Mbps Power over Ethernet (PoE) Gigabit Ethernet ports. The DGS-3130-30S/54S provides 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the 802.3af and 802.3at PoE standards. The default power budget for these models is 370 watts and can be expanded to 740 watts with the DPS-700 RPS. The switches are also equipped with an USB 2.0 port, allowing the user to boot images and upload configuration files directly from, as well as conveniently save syslog files onto a USB 2.0 storage device.

Enhanced Network Reliability

The DGS-3130 Series targets enterprises and metro Ethernet applications, and customers who require a high level of network security and maximum uptime. All the models in the DGS-3130 Series support an external redundant power supply to ensure continued operation. They also include reliability features, such as 802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), and 802.1s Multiple Spanning Tree (MSTP), Loopback Detection (LBD), and Broadcast Storm Control, that enhances network resilience. G.8032 Ethernet Ring Protection Switching (ERPS) minimizes the recovery time to 50 ms. For load sharing and redundancy backup in a switch cascading/server attachment configuration, the DGS-3130 Series provides dynamic 802.3ad Link Aggregation Port Trunking.

Comprehensive Security

The DGS-3130 Series provides users with the latest security features such as Multi-layer and Packet Content Access Control Lists (ACL), Storm Control, and IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC and also define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets and saving them to the IMPB white list.

Easy Access Control Policies

The DGS-3130 Series supports authentication mechanisms such as 802.1X, Webbased Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and easy deployment. After authentication, individual policies such as VLAN membership, QoS policies, and ACL rules can be assigned to each host. In addition, the switch also supports Microsoft® NAP (Network Access Protection). NAP is a policy enforcement technology that allows customers to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile Traffic Management

The DGS-3130 Series implements a rich set of multilayer QoS/CoS features to ensure that critical network services such as VoIP, video conferencing, IPTV, and IP surveillance are given high priority. Traffic Shaping features guarantee bandwidth for these services when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications. Hostbased IGMP/MLD Snooping allows multiple multicast subscribers per physical interface and ISM VLAN to send multicast streams in a multicast VLAN to save bandwidth and to provide better security to the backbone network. The ISM VLAN profiles allow users to bind/replace the pre-defined multicast registration information to subscriber ports quickly and easily.

Product TypeEthernet Switch
Interfaces/Ports
Total Number of Network Ports2
Uplink PortYes
ModularYes
Stack PortYes
Port/Expansion Slot Details
Media & Performance
Media Type Supported
Ethernet Technology
Network Technology
I/O Expansions
Number of Total Expansion Slots28
Expansion Slot Type
Shared SFP SlotNo
Number of SFP Slots24
Number of SFP+ Slots4
Network & Communication
Layer Supported3
Management & Protocols
ManageableYes
Power Description
Power SourcePower Supply
Redundant Power Supply SupportedYes
Physical Characteristics
Height1.7"
Width17.3"
Depth9.8"
Weight (Approximate)7.08 lb
Title
ProductTitleD-Link DGS-3130-30S Ethernet Switch - 2 x 10 Gigabit Ethernet Uplink, 24 x Gigabit Ethernet Expansion Slot, 4 x 10 Gigabit Ethernet Uplink - Manageable - Optical Fiber, Twisted Pair - Modular - 3 Layer Supported

Warranty Information

Beach Audio Warranty

Code:25-222522

NetSuite ecommerce design

© 2020 Beach Audio, Inc. All Rights Reserved