Jabsco
Jabsco 3931236 4" 250 Cfm Flangemount Heavy Duty Blower - 12v
(No reviews yet)
Write a Review
- SKU:
- 18402531
- MPN:
- 3931236
- Availability:
- Out of stock
- Stock Update:
- 03/20/2024 09:50:29 AM PST
- Stock Update:
- 03/20/2024 09:50:29 AM PST
Description
This item is brand-new, factory sealed.
Heavy Duty Flangemount BlowerHeavy Duty Blowers are designed for applications such as commerical or high use engine room ventilation and extraction where a long life requirement demands heavy duty motors with long brush life. Built to provide the same high outputs as our standard specification blowers.
- 5,000 hr motor life for the heaviest of applications
- Continuous duty
- Efficient high volume air flow
- Outlet flange mounts directly on bulkhead
- Slip on inlet ducting connection
- Low current draw
- Corrosion resistant materials throughout
- Dimensionally stable quiet running Delrin rotors
- Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
- ISO 9097 MARINE (Electric Fans)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Features
Certifications & Standards:
Ducting Size: 4"
- ISO 8846
- USCG 183.410
- ISO 9097 MARINE
- CE
Additional Information:
Ducting Size: 4"
Specs
| Power Description | |
| Input Voltage | 12 V DC |
| Physical Characteristics | |
| Product Material | Plastic |
| Weight (Approximate) | 6 lb |
| Application/Usage | Ventilating |
| Height | 9" |
| Width | 8.7" |
| Warranty | |
| Limited Warranty | 1 Year |
| General Information | |
| Brand Name | Jabsco |
| Manufacturer Website Address | http://www.xyleminc.com |
| Marketing Information | Mount blower on flat bulkhead surface in highest part of compartment free from spray or deck wash. Cut a 3-5/8" hole in bulkhead and secure blower with washers and No. 10 screws ( NOTICE: Tighten screws evenly to avoid flange damage). Use a suitable discharge fitting so that static pressure of blower will not be affected by change in wind direction. Route inlet ducting with as few bends as possible to lower 1/3 of the bilge compartment where vapors are likely to accumulate. Be sure ducting is positioned below top of engine stringers but not so low as to become submerged in bilge water. Locate pickup to take advantage of natural air flow direction. |
| Product Type | Handy Air Blower |
| Product Name | Continuous Duty 4" Blower |
| Manufacturer | Xylem, Inc |
| Manufacturer Part Number | 35760-0092 |
| Product Model | 35760-0092 |
| Product Series | 35760 |
| Technical Information | |
| Air Flow | 1870.1 gal/min |
| Features |
|
Warranty Information
All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose
Jabsco 3931236 4" 250 Cfm Flangemount Heavy Duty Blower - 12v