Makerbot
MakerBot True White PLA Large Spool / 1.75mm / 1.8mm Filament (mp05780)
- SKU:
- 18150279
- MPN:
- mp05780
- Availability:
- Out of stock
- Stock Update:
- 03/25/2024 09:20:34 AM PST
- Stock Update:
- 03/25/2024 09:20:34 AM PST
Description
This item is brand-new, factory sealed.
MakerBot PLA Filament is the best, most consistent, and most tested filament for the MakerBot® Replicator® 2 Desktop 3D Printer.
MakerBot PLA Filament is a bioplastic derived from corn. It's guaranteed to have no heavy metals phthalates, or BPA.
Each filament color is comprehensively quality tested at both 100-micron and 200- micron layer resolutions on the MakerBot Replicator 2 to verify it will perform every feature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model.
If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to blue painter's tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Features
- Spool Diameter: 8 in
- Spool Width: 3 in
- Spool Hub Hole: 2 in
- Diameter: 1.75 mm
Temperatures:- Glass Temp: 60-65°C (140-149°F)
- Melting Temp: 150-160°C (302-320°F)
- Nozzle Temp: 230°C (446°F)
Compatibility:
MakerBot Replicator 5th Generation Z18 3D Printer
Specs
| Physical Characteristics | |
| Weight (Approximate) | 2 lb |
| General Information | |
| Brand Name | MakerBot |
| Manufacturer Website Address | http://www.makerbot.com |
| Marketing Information | MakerBot PLA Filament is the best, most consistent, and most tested filament for the MakerBot® Replicator® 2 Desktop 3D Printer. MakerBot PLA Filament is a bioplastic derived from corn. It's guaranteed to have no heavy metals phthalates, or BPA. Each filament color is comprehensively quality tested at both 100-micron and 200- micron layer resolutions on the MakerBot Replicator 2 to verify it will perform every feature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model. If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to blue painter's tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. |
| Packing | Spool |
| Product Type | 3D Printer PLA Filament |
| Product Name | True White PLA Large Spool / 1.75mm / 1.8mm Filament |
| Manufacturer | MakerBot Industries, LLC. |
| Manufacturer Part Number | MP05780 |
| Technical Information | |
| Print Color | True White |
Warranty Information
