Home » Accessories » Power Equipment » Power Injectors/splitters » NPOE30W1G

Tripplite NPOE-30W-1G Gigabit Midspan Poe+ Injector Active 1pt 

2 in stock (as of 05/23/2018 02:13 PM)

Shipping Estimate:

Tripplite NPOE-30W-1G Gigabit Midspan Poe+ Injector Active 1pt
Zoom panel loading...


Tripplite
Additional Images:   Medium | Original | 900 | 1100 | Alternate-Image1 | Alternate-Image2 | Alternate-Image3 | Alternate-Image4
Additional Media:      Manufacturer-Brochure
Added to our catalog within last 30 days
Model: NPOE-30W-1G
View other products from Tripplite

$45.57
Estimated Shipping: $8.00

Description

Adds PoE Devices to Your LAN Without a PoE Switch

Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

Saves You Time and Money on Unnecessary Equipment Updates

This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

Expand Your Wireless Network Up to 328 ft.

The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes

No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere

Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

3-Year Warranty and Environmentally Responsible Design

The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.



Package Contents:
  • NPOE-30W-1G PoE Injector
  • Detachable C13 to NEMA 5-15P power cord, 6 ft.
  • Owner's manual
  • Green Initiatives

Features

Package Contents: 
  • NPOE-30W-1G PoE Injector
  • Detachable C13 to NEMA 5-15P power cord, 6 ft.
  • Owner's manual
  • Green Initiatives


Certifications & Standards: 
  • CE
  • FCC
  • UL
IEEE Standards Supported
  • 803.3
  • 802.3ab
  • 802.3af
  • 802.3at
  • 802.3u



Environmentally Friendly: Yes

Environmental Certification: RoHS

Environmental Certification: REACH

Environmental Certification: WEEE

Specification

General Information
ManufacturerTripp Lite
Manufacturer Part NumberNPOE-30W-1G
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelNPOE-30W-1G
Product NameNPOE-30W-1G PoE Injector
Marketing Information

Adds PoE Devices to Your LAN Without a PoE Switch

Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

Saves You Time and Money on Unnecessary Equipment Updates

This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

Expand Your Wireless Network Up to 328 ft.

The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes

No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere

Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

3-Year Warranty and Environmentally Responsible Design

The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.

Product TypePoE Injector
Power Description
Input Voltage
Minimum Frequency50 Hz
Maximum Frequency60 Hz
Interfaces/Ports
Input PortsEthernet
Output PortsEthernet
Physical Characteristics
ColorBlack
Form FactorDesktop
Mount TypeSurface-mountable
Title
ProductTitleTripp Lite Gigabit Midspan PoE+ Injector Active IEEE 802.3at/802.3af 1-Port - 120 V AC, 230 V AC Input - Ethernet Input Port(s) - Ethernet Output Port(s) - Surface-mountable - Black

Warranty Information

Limited Warranty3 Year
Beach Audio Warranty

This product was added to our catalog on Thursday, May 24, 2018.

Code:18-npoe-30w-1g

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved