Home » Accessories » Power Equipment » Pdus » PDUMH15ATNET

Tripplite Pdumh15atnet Digital Power Distribution Unit Pdu 8 Nema 5-15r 15a &... 

6 in stock (as of 04/19/2018 06:44 PM)

Shipping Estimate:
Qualifies for FREE Shipping!
Within the Continental USA
Tripplite Pdumh15atnet Digital Power Distribution Unit Pdu 8 Nema 5-15r 15a & Web Card (tripplite L50012)
Zoom panel loading...


Tripplite
Additional Images:   Medium | Large | Original | Front | Rear | 900 | 1100 | FrontMaximum | RearMaximum | 1500
Additional Media:      Manufacturer-Brochure
Added to our catalog within last 30 days
Model: PDUMH15ATNET
View other products from Tripplite

$467.74
Estimated Shipping: FREE

Description

Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power condition via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management to any type of network configuration. Supports notification and logging of input power status, event notification, output power and PDU loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 8 NEMA 5-15R outlets and two 12 ft. 5-15P optional-use dual cords for auto-transfer switching (ATS) option. Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection.



Package Contents:
  • PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
  • PDU with attached 5-15P input power cord
  • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
  • User manuals with warranty information

Features

Package Contents: 
  • PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
  • PDU with attached 5-15P input power cord
  • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
  • User manuals with warranty information


Certifications & Standards: 
  • 60950
  • Class A
  • RoHS compliant


Environmentally Friendly: Yes

TAA Compliant: Yes

Specification

General Information
ManufacturerTripp Lite
Manufacturer Part NumberPDUMH15ATNET
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelPDUMH15ATNET
Product NamePDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
Marketing InformationTripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
Product TypePDU
Technical Information
PDU TypeSwitched
Input Receptacles2 x NEMA 5-15P
Output Receptacles8 x NEMA 5-15R
Power Description
Input Voltage120 V AC
Output Voltage120 V AC
Power Rating (VA)1800 VA
Management
Management
  • Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails
  • Sequential outlet power-on prevents inrush-related equipment interaction on startup
  • Programmable or real-time outlet power control via web/network monitoring and control card
Physical Characteristics
ColorBlack
Mounting OrientationVertical
PlacementRack
Rack Height1U
Number of Cord/Cable2
Cord Length12
Height1.8"
Width1.8"
Depth14.5"
Weight (Approximate)11 lb
Title
ProductTitleTripp Lite PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM - 2 12ft Cords, 1U Rack-Mount, TAA"

Warranty Information

Limited Warranty2 Year
Beach Audio Warranty

This product was added to our catalog on Thursday, April 19, 2018.

Code:2-pdumh15atnet

NetSuite ecommerce design

© 2014 Beach Audio, Inc. All Rights Reserved