Kingston 16GB DDR4 SDRAM Memory Module (KSM26SED8/16HD) KSM26SED8/16HD

This item is brand-new, factory sealed.

DESCRIPTION

Kingston's KSM26SED8/16HD is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) w/ parity, 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


FEATURES

Power Supply: VDD = 1.2V

VDDQ = 1.2V

VPP = 2.5V

VDDSPD = 2.20V to 3.60V

Functionality and operations comply with the DDR4 SDRAM datasheet

16 internal banks

Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available

Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Supports ECC error correction and detection

On-Die Termination (ODT)

Temperature sensor with integrated SPD

This product is in compliance with the RoHS directive.

Per DRAM Addressability is supported

Internal Vref DQ level generation is available

Write CRC is supported at all speed grades

CA parity (Command/Address Parity) mode is supported

RoHS Compliant and Halogen-Free
CL(IDD)
19 cycles Row Cycle Time (tRCmin)
45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.) Row Active Time (tRASmin)
32ns(min.) UL Rating
94 V - 0 Operating Temperature
0^o C to +85^o C Storage Temperature
-55^o C to +100^o C Module Assembly
DRAM: HYNIX (D-DIE) Item Dimension (L"x W"x H")
7 x 2 x 1
Weight
1.00 LB
Warranty Information
Lifetime Warranty