Rolls MX54S Pro Mix Plus 3 Ch Mic Mixer

This item is brand-new, factory sealed.

The MX54s Pro-Mix Plus mixes three microphones into two transformer balanced outputs. It has three XLR inputs, each with individually switchable phantom power, and Low Cut (100 Hz high pass filter) switches, a Level control, and a Pan control. As mentioned, it has two transformer balanced, XLR outputs. A 1/4 inch Aux/Headphone output has been provided along with a Clip indicator, Power indicator, and Power switch. The unit is also powered by two 9-Volt alkaline batteries.

MX54s Promix Plus

* Mixes three microphones to stereo XLR outputs
* Output level controls for mic or line-level output
* Transformer isolated outputs
* Phantom Power and Low-Cut switches for each Mic input
* Battery and AC powered
* Handy shoulder strap mounts
* Switchable Low Cut filter (100 Hz high pass) for each channel
* Input Impedance: 600 Ohms
* Output Impedance: XLR 600 Ohms
* THD + Noise: .02%
* S/N Ratio: 84 dB
* Frequency Response: 25 Hz - 16 kHz (+0 / -3 dB)
* Max Output Level: + 14 dB
* Max Input Level: -14 dB
* Max Gain: +60 dB
* Low Cut: -3 dB @ 100 Hz
* Current Draw: 20 mA
* Phantom Power: +18 VDC
* Connectors: 3: Female XLR, 2: Male XLR, 1: 1/4" TRS, DC Power Jack
* Size: 5.3" x 3.7" x 2"
* Weight: 1 lbs.
* Current drain 15ma nominal one mic 15vdc