SHUTTLE COMPUTER 249620 Shuttle System Nc10u3 Intel I3-8145u No Ram No Hdd Ssd No Os Retail

This item is brand-new, factory sealed.

Shuttle's NC10 series is powered by Intel's power-saving ULV (ultra-low-voltage) processors of the Whiskey-Lake-U generation and comprises four models with processors from Celeron to Core i7. All four models support two digital video outputs for UHD/4K displays with 60 Hz and one 2.5" drive that is up to 15 mm in height as well as one M.2-2280 NVMe SSD card. Professional users will appreciate Intel Gigabit-LAN and one serial port which indicates what purposes the NC10 series is mainly intended for Digital Signage, POS, control, office or even multimedia. Chassis
Barebone PC with a black plastic chassis
Hole for Kensington Lock
Includes vertical stand and 75 / 100 mm VESA mount
Low Power Consumption
Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
Operation Position
1) Horizontal
2) Vertical with stand
3) VESA-mounted behind an appropriate monitor
Operation System
This barebone system comes without operating system.
It is compatible with:
- Windows 10, 64-bit
- Linux, 64-bit
Processor
Model: Intel Core i3-8145U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
FCBGA1528 package - directly soldered onto the mainboard
Code name: Whiskey Lake U (8th Generation Intel Core)
Cores / Threads: 2 / 4
Clock rate: 1.8 GHz
Max. Turbo Frequency: 3.9 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 4 MB
TDP wattage: 15 W maximum
Manufacturing process: 3rd-generation enhanced 14nm++
Maximum Tjunction Temperature: 100 ^oC
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Cooling Fan
Built-in CPU cooling fan with 4-pin connector
Supports temperature-controlled RPM fan speed
Integrated Graphics
Intel UHD Graphics 620
GPU clock frequency: 300-1000 MHz
Execution Units (EUs): 24
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports up to two independent screens:
1) DisplayPort 1.2 supports Ultra HD at 60 Hz
2) HDMI 2.0a supports Ultra HD at 60 Hz
Mainboard / BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports booting from USB devices and SD card reader
Supports hardware monitoring and watchdog function
Supports Unified Extensible Firmware Interface (UEFI)
Supports Firmware TPM v2.0 (fTPM) Power Adapter
External 65 W power adapter (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC cable ca. 175 cm with coaxial connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports 19V+/-5%.
AC cable, ca. 170 cm, with flat, two-pole Europlug
Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
Supports DDR4-2666 at 2400 MHz
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
2.5" Drive Bay
Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35 cm / 2.5" format
Device height: 15 mm (max.)
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory cards
Supports booting from SD card
M.2 Slot for SSDs
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 4 GB/s data transfer rate
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs with NVMe (with M key)
Audio
Audio Realtek ALC 662 High-Definition Audio Codec
3.5 mm / 4-pole combo audio connector for headphones and microphone ⁽²⁾
Digital multi-channel audio output: via HDMI and DisplayPort
Gigabit LAN
Ethernet Controller Intel i211
Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
IEEE 802.3az Energy Efficient Ethernet (EEE)
Interface: PCIe v2.1
Wireless LAN
Built-in M.2-2230-A/E WLAN card and internal antenna
Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i
Front Panel connectors
USB 3.2 Gen 1 Type-A (max. 5 Gbps, blue)
USB 3.2 Gen 1 Type-C (max. 5 Gbps)
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue, flashing when in suspend mode)
HDD LED (orange)
Back Panel connectors
DisplayPort 1.2 ⁽¹⁾
HDMI 2.0a
2x USB 2.0 Type-A
Gigabit LAN (RJ45)
Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) ⁽²⁾
DC-input connector for external power adapter
2x perforation for optional external WLAN antennas
Left Side connectors
Serial RS232 COM port (D-Sub, 9-pin)
Note: The serial connector (COM port) cannot be used if the NC10U3 is operated in vertical position.
Always-On Jumper
By removing Jumper JP1 (please refer to the Quick Installation Guide)
the system will start unconditionally once power is applied. ⁽⁴⁾