Startech Ethernet Network adapter card - PCI - EN ST1000BT32

(No reviews yet) Write a Review
Usually ships the same or next business day. In stock at our PA warehouse.
Calculated at Checkout
Stock Update:
05/19/2023 10:05:24 AM PST
  • Main
  • Alternate-Image3
  • Alternate-Image2
  • Alternate-Image1

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 3 and pay only $22.54 each 22.54
Buy 4 and pay only $21.09 each 21.09
Buy 5 - 9 and pay only $20.48 each 20.48
Buy 10 - 13 and pay only $18.92 each 18.92
Buy 14 or above and pay only $18.59 each 18.59
Stock Update:
05/19/2023 10:05:24 AM PST


This item is brand-new, factory sealed.

With speeds ten times faster than Fast Ethernet, Gigabit Ethernet is
the new standard for broad-bandwidth networking. Give your high-
powered workstations or network servers up to 2Gbits/sec (full-
duplex mode) of dedicated bandwidth with the
ST1000BT32, a 10/100/1000 Mbits/sec Gigabit PCI networking card for
32-bit systems. The card complies with IEEE 802.3ab Gigabit
Ethernet standards and offers advanced features like Jumbo Packet
support to keep your high-performance applications and devices
operating at their maximum capacity.
The card supports both full- and half-duplex communications and uses
Auto-Negotiation to ensure backwards-compatibility with 100BaseTx
and 10BaseT Ethernet standards. The ST1000BT32 is Plug and Play
compatible and works with Cat 5e and above Ethernet cables, so your
migration to Gigabit Ethernet doesn't mean a total network
* Windows Compatible
* Servers with high performance network applications and congested network
* Industries that need to increase productivity and cost savings through
high network throughput.
* Ideal for enterprise and data center environments.
* Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x
* Supports 32-bit 33/66MHz PCI Local Bus Master for high-speed operation.
* One RJ-45 connector supports 1000Mbits/sec, 100Mbits/sec or 10Mbits/sec
network speed and Auto-MDI/MDI-X.
* Plug-and-Play installation
* Support IEEE 802.3x full-duplex flow control
* Full-duplex design increases your network performance to
* Supports PCI 2.1 Wake ON LAN function.
* Supports IEEE 802.1Q VLAN tagging for up to 64 VLANs.
* Three LED indicators show network link/activity and 10/100/1000Mbits/sec

* Compliant Standards:
* IEEE 802.3: 10BaseT Ethernet
* IEEE 802.3u: 100BaseTX Fast Ethernet
* IEEE 802.3ab: 1000BaseT Gigabit Ethernet
* IEEE 802.3x: Flow Control
* Bus Architecture: PCI Version 2.2/2.1, 32-bit 33/66MHz Bus
* Network Port: RJ-45 x 1 (Auto-MDI/MDI-X)
* Network Media-
- 10BaseT: UTP/STP category 3, 4 or 5 cable
- 100BaseTX: UTP/STP category 5 cable
- 1000BaseT: 4 pair s category 5 cable
* Protocol: CSMA/CD
* Data Transmission Rate: 1000Mbits/sec Full/Half, 100Mbits/sec Full/Half,
10Mbits/sec Full/Half
* IRQ Line & I/O Address: Allocated by system
* Support Drivers: Windows 98SE/Me/NT/2000/XP, Netware Server 5.x, Netware
ODI for DOS Linux and Unix
* LED Indicators-
- 10Mbits/sec Link/Activity
- 100Mbits/sec Link/Activity
- 1000Mbits/sec Link/Activity
* Operating Temperature: 0o to 55oC
* Dimension: 144 x 63 mm
* Certification: FCC Class B & CE Mark C-tick

Package Contents:
  • ST1000BT32 Ethernet Network Adapter Card
  • 1 x Driver disk
  • 1 x Installation Guide


Package Contents:   
  • 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card
  • 1 x Low Profile Bracket
  • 1 x Driver CD
  • 1 x Instruction Manual


Environmental Certification:



Environmentally Friendly:   


System Requirements:   
  • Windows® NT, ME, 2000, XP, Vista, 7, 8, 8.1, 10
  • Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
  • Netware Server 5.x, Netware ODI for DOS
  • Linux 2.6.x to 4.11.x, Unix
  • Mac OS X 10.4


Device Supported:   


Country of Origin:   



Physical Characteristics
Form FactorPlug-in Card
Weight (Approximate)1.90 oz
Limited WarrantyLifetime
Network (RJ-45)Yes
Total Number of Ports1
Host InterfacePCI
Number of Network (RJ-45) Ports1
General Information
Manufacturer Website Address
Marketing InformationThis PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network, and is fully compatible with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards.
Suitable for any PCI-enabled client, server or workstation, the Gigabit Ethernet Network Adapter Card supports high performance dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.
Compatible with a broad range of operating systems, including Linux, Windows 10, 8/8.1, ME, 2000, XP, XP-64bit, Vista, Vista-64bit, 7, 7-64bit as well as Mac OS 10.4, this high quality PCI Gigabit NIC includes an optional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.
More from the Manufacturer
Product TypeGigabit Ethernet Card
Product Name1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card
Manufacturer Part NumberST1000BT32
Product ModelST1000BT32
Packaged Quantity1
Media & Performance
Data Transfer Rate125 MB/s
Media Type SupportedTwisted Pair
Network & Communication
Network Technology10/100/1000Base-T
Technical Information
Chipset ManufacturerRealtek
Chipset ModelRTL8110SC

View AllClose

Warranty Information

All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose

0 Reviews

View AllClose
Main Ethernet Network adapter card - PCI - EN ST1000BT32