3m 3MP-16238 Paint Preparation System Spray Gun Holder 16238, Quad Guns

This item is brand-new, factory sealed.

• Rack for keeping spray guns used with the 3M Paint Preparation System, PPS easily accessible
• 3M PPS is an all-in-one disposable solution for mixing/measuring, filtering, spraying in any direction
• System enables the painter the ability to consistently spray at 90 to the part, no matter the part orientation (even upside down) improving transfer efficiency and reducing material waste
• The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
• PPS reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%
• System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use

• Product Dimensions: 19 x 14.9 x 7.9 inches
• Item Weight: 1 pounds
• Manufacturer: 3M

Wall mount spray gun holder. Holds 4 spray guns.

3M PPS Spray Gun Holder is an accessory for use with the 3M Paint Preparation System (PPS). This holder keeps spray guns conveniently accessible and in a safe location while in storage. Keeping spray guns in this holder safeguards them from potential damage that can occur from laying them on a table or the floor. Choose from holders designed to store one, two or four spray guns.

Advantages of the 3M PPS System
Unlike conventional paint cup systems, our 3M PPS eliminates the need for mixing paint in traditional paint mix cups and filtering through traditional cone filters, reducing expensive liquid material waste. This is an important advantage because waste occurs every time that an auto body technician transfers paint through mixing cups and filters. With PPS, you place a PPS Mix Ratio inside of the hard-shell PPS Cup, then place the disposable liner within the re-usable PPS Cup. Then simply mix the paint in the PPS disposable liner, snap the disposable lid (with the pre-welded filter, either 200 micron or 125 micron) in place and attach the locking collar to complete the PPS System. Remove your existing cup from your existing gun and insert the PPS adapter built for your spray gun (find the complete list at www.3Mcollision.com/adapters). With just these few simple steps, you're ready to start spraying.

Your spray gun functions at any angle, even upside down
PPS allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption because painters are able to apply more paint to the substrate. Additionally, improved ergonomics allow painters to be more functional, thus more productive.

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter has a choice of either using a sealing plug to temporarily store non-catalyzed paint materials, or clean-up. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. Simply throw the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements) and use a small amount of solvent for cleaning the spray gun and the PPS adapter. It is possible to clean your paint gun with as little as 3 fluid ounces (90mL) of solvent. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which also means cleaning solvent savings, solvent disposal savings and less operator exposure to solvents.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS stainless steel metal adapters allow painters to use the PPS system with virtually any spray gun. Painters have also the option to use the 3M Accuspray Replaceable Atomizing Head Series spray guns, which requires no adapters, no maintenance kits and allows for the performance of a brand new spray gun simply be removing and replacing the atomizing head. When painting cars, auto body technicians will find that this spray gun further reduces cleaning solvent usage, improves transfer efficiency and eliminates the need for spray gun rebuild/maintenance kits.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh liner and lid with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

The Bottom Line: Why 3M PPS is the Paint Spray System of Choice
3M PPS is the standard for Automotive, Marine and Industrial paint/coating application cup systems. An all-in-one disposable system that consistently produces cleaner jobs, saves on coating consumption and reduces solvent usage by up to 70%. Technicians everywhere can operate with greater efficiency and spend less time cleaning. The benefits of PPS can be further amplified when used with 3M Accuspray spray guns, further reducing solvent usage, eliminating spray gun maintenance kits and combining to make the only system on the market which allows the capability to have the performance of a brand new spray gun, at a fraction of the cost of a new spray gun.