AFE Power 4212034 Diesel Fuel System for RAM

This item is brand-new, factory sealed.

• Supplied preset boost switch activates pump only under load, reducing wear & tear on both the DFS780 and the stock high-pressure pump
• Clear high-impact polycarbonate sight glass for visual inspection of fuel
• Helical Spur Gears runs quieter than straight cut gears
• Contoured CNC manifold enhances flow
• This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles

• Material Type: Aluminum
• Item Weight: 7711 Grams
• Item Dimensions: 19 x 11 x 8 inches
• UPC: 802959420041
• Specification Met: OE
• Operation Mode: Mechanical
• Auto Part Position: Front

Features: Boost activated so unit only runs under high loads - Clear high-impact polycarbonate sight glass for visual inspection of fuel - Helical Spur Gears runs quieter than straight cut gears - "Marine Grade" motor protects against dust and water - Contoured CNC manifold enhances flow - Fuel pressure gauge port - O.E. quality Viton Seals - Typical install is 2 hours - Built in the USA. Boost Activated: This DFS780 works in conjunction with the stock fuel pump and is only activated during heavy loads (via supplied boost switch), reducing wear & tear. Clear High-Impact Polycarbonate Sight Glass: Allows visual inspection of fuel. Helical Bronze Spur Gears: Bronze gears more forgiving of contaminants than steel gears. The Helical spur gear design runs quieter than straight cut gears. Billet 6061-T6 Aluminum Manifold: Eliminates porosity concerns with cast aluminum. "Marine Grade" Motor: Protected against dust intrusion and powerful water jets. Plug & Play Installation: Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock. PEEK Bearing Wear Surfaces: The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear. Contoured CNC Machining Of Manifold Passages: Enhances flow through the manifold to reduce pressure drop due to flow restrictions. Direct Bolt-on Steel Mounting Bracket: Heavy duty bracket mounts to the frame and utilizes existing hole to secure. Fuel Pressure Gauge Port:1/8" NPT port allows customer to attach an external pressure gauge to monitor fuel pressure. OE Quality Viton Seals: Compatible with diesel and biodiesel fuels.