Astro Pneumatic 7801 7 Piece Sensor And Sending Unit Socket Set

This item is brand-new, factory sealed.

Features and Benefits:

• New
• Set Includes:? 1" & 1-1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1-1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8". Designed to be used with a 3/8" drive tool or 1-1/8" wrench.? 1-3/16" Oil Pressure Sending Unit SocketAllows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool.? 1-1/16" GM Thermal Sensor Switch SocketAllows the removal and installation of thermal sensor switch on 1973 - 1977 GM vehicles. Designed to be used with 1/2" drive tool.? 7/8" Heated Oxygen Sensor SocketSocket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" drive for easy access.
• New

The Astro Pneumatic 7801 7pc. Sensor & Sending Unit Socket Set is constructed of Cr-V for durability. This set includes the following pieces: • 1 in.; & 1-1/16 in.; Oil Pressure Sending Unit Socket Includes a 1 in.; and 1-1/16 in.; hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8 in.;. Designed to be used with a 3/8 in.; drive tool or 1-1/8 in.; wrench.• 1-3/16 in.; Oil Pressure Sending Unit SocketAllows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2 in.; drive tool.• 1-1/16 in.; GM Thermal Sensor Switch SocketAllows the removal and installation of thermal sensor switch on 1973 - 1977 GM vehicles. Designed to be used with 1/2 in.; drive tool.• 7/8 in.; Heated Oxygen Sensor SocketSocket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2 in.; drive for easy access.• 7/8 in.; Low Profile Offset Oxygen Sensor SocketLow profile design for use in tight spaces. Designed to be used with 3/8 in.; drive tool.• 7/8 in.; Oxygen Sensor SocketSocket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8 in.; drive tool or 1 in.; wrench.• 7/8 in.; Universal Vacuum PVS, TVS Valve and Oxygen Sensor SocketDesigned to remove and install vacuum switches with a 7/8 in.; hex and some oxygen sensors. Designed to be used with 3/8 in.; drive tool or with a 1 in.; wrench.