Black Box Network Services
Black Box Async RS232/RS422/RS485 Extender Fiber Terminal Block - ST Single-Mode (md650a-13)
- SKU:
- 18923205
- MPN:
- md650a-13
- Availability:
- Out of stock
- Stock Update:
- 10/23/2023 10:48:05 AM PST
- Stock Update:
- 10/23/2023 10:48:05 AM PST
Description
This item is brand-new, factory sealed.
Universal Fiber Optic Line Driver Transceiver, 1310nm Single-Mode- Extend RS232, RS422 or RS485 protocols over multimode fiber so different types of equipment can talk
- Product Dimensions: 3.5 x 4.02 x 1.3 inches
- Item Weight: 1.59 pounds
Extend RS232, RS422 or RS485 protocols over multimode fiber so different types of equipment can talk to one another in point to point or multipoint environments. Serial extenders work well in factory automation, building automation, and process automation where PLC's with RS232, RS422, or RS485 interfaces are used to control devices. The ability to extend the distance to their devices over fiber while also adding protection from electrical interference which can be caused by large motors that are prevalent in these environments is very beneficial. Use fiber instead of copper to send your RS-232, RS-422, and RS-485 data - and do so without having to route it through protocol converters. Universal Fiber Optic Line Driver Transceivers enables you to transmit and receive the signals over fiber optic cabling in both point-to-point or drop-and-repeat topologies. You can even mix protocols. For instance, you can set one transceiver to interface with an RS-232 device at one end and another to interface with an RS-485 device at the opposite end. There's no need for a converter box at either end of the fiber link. Universal Fiber Optic Line Driver Transceivers also offer a wide range of speeds and distances - up to 21.75 miles (35 km) with the single-mode version. Product Type: Transceiver/Media Converter Maximum Distance Supported: 21.75 Mile Power Source: Power Supply Product Type: Transceiver/Media Converter Manufacturer Part Number: MD650A-13 Maximum Distance Supported: 21.75 Mile Power Source: Power Supply Limited Warranty: 3 Year Manufacturer: Black Box Corporation Product Name: Async RS232/RS422/RS485 Extender Fiber Terminal Block - ST Single-Mode Brand Name: Black Box Brand Name: Black Box Plug/Connector Type: Terminal Block Country of Origin: United States Height: 1.3 Width: 3.5 Depth: 4 Number of ST Ports: 1 Media Type Supported: Optical Fiber Fiber Mode Supported: Single-mode Total Number of Ports: 1 ST Port Type: Duplex TAA Compliant: Yes Environmentally
Features
Yes
Environmentally Friendly:
Yes
Country of Origin:
United States
Specs
| Power Description | |
| Plug/Connector Type | Terminal Block |
| Power Source | Power Supply |
| Physical Characteristics | |
| Height | 1.3" |
| Width | 3.5" |
| Depth | 4" |
| Warranty | |
| Limited Warranty | 3 Year |
| Interfaces/Ports | |
| ST Port Type | Duplex |
| Total Number of Ports | 1 |
| Number of ST Ports | 1 |
| General Information | |
| Brand Name | Black Box |
| Manufacturer Website Address | http://www.blackbox.com |
| Marketing Information | Extend RS232, RS422 or RS485 protocols over multimode fiber so different types of equipment can talk to one another in point to point or multipoint environments. Serial extenders work well in factory automation, building automation, and process automation where PLC's with RS232, RS422, or RS485 interfaces are used to control devices. The ability to extend the distance to their devices over fiber while also adding protection from electrical interference which can be caused by large motors that are prevalent in these environments is very beneficial. Use fiber instead of copper to send your RS-232, RS-422, and RS-485 data - and do so without having to route it through protocol converters. Universal Fiber Optic Line Driver Transceivers enables you to transmit and receive the signals over fiber optic cabling in both point-to-point or drop-and-repeat topologies. You can even mix protocols. For instance, you can set one transceiver to interface with an RS-232 device at one end and another to interface with an RS-485 device at the opposite end. There's no need for a converter box at either end of the fiber link! Universal Fiber Optic Line Driver Transceivers also offer a wide range of speeds and distances - up to 21.75 miles (35 km) with the single-mode version. |
| Product Type | Transceiver/Media Converter |
| Product Condition | New |
| Product Name | Async RS232/RS422/RS485 Extender Fiber Terminal Block - ST Single-Mode |
| Manufacturer | Black Box Corporation |
| Manufacturer Part Number | MD650A-13 |
| Media & Performance | |
| Maximum Distance Supported | 35 km |
| Media Type Supported | Optical Fiber |
| Fiber Mode Supported | Single-mode |
| Fiber Optic Cable Wavelength | 1310 nm |
Warranty Information