Cudy 301765 5 Port Gigabit PoE Switch

This item is brand-new, factory sealed.

IEEE 802.3at/af. Up to 30W Per Port.

Each PoE port delivers up to 30W of power, making it suitable for access points, IP cameras, digital signage, and most other PoE devices.


PoE Auto Recovery

Watchdog will be enabled under VLAN and Extend modes, and if a connected device freezes and stops transmitting data for 5 minutes, the Watchdog will automatically reboot the corresponding PoE port.


Extend for 250 m Transmission

For long-distance networking, enable the Extend mode to connect clients up to 250 meters away by limiting the port speed to 10 Mbps.


VLAN Isolates Downlink Ports for Improved Safety

Turn on the VLAN mode to prevent client-side hacking, preventing sensitive data from leaking. The downlink clients will only be able to communicate with the uplink devices.


Plug and Play

Connect your router to the uplink port, client devices to PoE ports, and power on the PoE switchthen you're good to go.


Fit into a Distribution Box

Fits easily into most distribution boxes and makes cable management a breeze.


Protect Clients with Outstanding EMC

Shield your cameras and access points, from surges in power grid and ESD, delivering rock-solid reliability.

ESD: Contact 6kV; Air 8kV

Surge: Power DM 2kV, CM 4kV; RJ45 CM 4kV Interfaces
Gigabit RJ45 Ports
5

Gigabit RJ45 PoE Ports
Number1 to Number4

Max Power on a Single PoE Port
30W

PoE Port Notes
The PoE ports comply with IEEE 802.3at/af standards.

PoE Priority
Intelligent Power Management:
Automatically disconnect the lastly powered device when power exceeds budget.

Shielded RJ45 Port
True

Extend Mode PortsNumber
1 to Number4

VLAN Mode PortsNumber
1 to Number4

LED
Power
PoE Status of Each PoE Port
Link/ACT of Each Ethernet Port
PoE Max Status

Power Interfaces
DC Jack

Physical Buttons
VLAN/Default/Extend DIP Switch
PoE Watchdog On/Off

Physical Buttons Note
The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature. Performance
Copper Speed and Distance
Cat. 3 or higher cable: 100 meters at 10 Mbps
Cat. 5 or higher cable: 100 meters at 100 Mbps
Cat. 5e or higher cable: 100 meters at Gigabit
Cat. 5e or higher cable: 250 meters at 10 Mbps

Copper Speed and Distance Note
250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.

MAC Address Table
2048

Max Switching Capacity
10 Gbps

Max Forwarding Rate
7.44 Mpps

Jumbo Frame
15 KB

Packet Buffer
3 Mbit Power
Power Methods
DC

Power Input
54V Direct Current 1.11A

Power Adapter in the Box
Input: 100-240ACV, 50/60Hz
Output: 52V Direct Current 1.11A

Power Supply
60W

Max Power Excluding PoE
5W Switching
802.3 Protocols
802.3i 10BASE-T
802.3u 100BASE-TX
802.3ab 1000BASE-T
802.3x Flow Control
802.3af PoE
802.3at PoE

PoE Management
Intelligent Power Management Reliability
Grounding Methods
Three-Prong Plug

EMS
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV, Air: 8kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV, RJ45: CM 4kV

Environment
Operating Temperature: 0 to 40 ^oC (32 to 104 ^oF)
Storage Temperature: -40 to 70^oC (-40 to 158 ^oF)
Operating Humidity: 10 to 90% non-condensing
Storage Humidity: 10 to 95% non-condensing Mechanical
Casing Material
Metal

Installation
Desktop
Wall-mount Package Content
GS1005P
Power Adapter
Power Cord
Installation GuideItem Dimension (L inchxW inchxH inch)
7 x 8 x 4

Weight
2.00 lb

Warranty Information
2 years