Kingston DC600M 960 GB Solid State Drive - 2.5" Internal - SATA [SATA/600] - Mixed Use (sedc600m-960g)

This item is brand-new, factory sealed.

Designed for Data Center Environments

On-board Power Loss Protection (PLP)

Consistent latency and IOPS, reliable QoS

Up to 560MB/s Read, 530MB/s Write

Part Number: SEDC600M/960GForm factor
2.5 Inch

Interface
SATA Rev. 3.0 (6Gb/s) - with backwards compatibility to SATA Rev. 2.0 (3Gb/s)

Capacities
¹960GB

NAND
3D TLC

Sequential Read/Write
960GB - 560MBs/530MBs

Steady State 4k Random Read/Write
960GB - 94,000/65,000 IOPS

Quality of Service (Latency) ³,⁴,⁵ (99.999)
Read/Write
960GB - 200/300 uSec

Typical Latency - Read/Write
<200 s / <30 us³,⁴,⁵

Hot-Plug Capable
Static and Dynamic Wear Leveling

Enterprise SMART tools
Reliability tracking, usage statistics, life remaining, wear leveling, temperature

Hardware-based Power Loss Protection Endurance
960GB - 1752TBW⁶, 1 DWPD (5 years)⁷, 1.66 DWPD (3 years)⁷

Power Consumption
Idle: 1.30W
Average: 1.45W
Max Read: 1.6W
Max Write: 3.6W

Storage temperature
-40^oC - 85^oC

Operating temperature
0^oC - 70^oC

Vibration operating
2.17G Peak (7-800Hz)

Vibration non-operating
20G Peak (10-2000Hz)

MTBF
2 million hours
UBER
< or equals 10 -17Note:
1.Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingstons Flash Memory Guide.
2. Quality of Service (QoS) of an SSD refers to the consistency and predictability of Latency (response time) and IOPS (IOs Per Second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSDs latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
3. Measurement taken once the workload has reached steady state but including all background activities required for normal operation and data reliability.
4. Based on 1920GB capacity.
5. Workload based on FIO, Random Aligned 4KB QD1 workload. Quality of Service is measured as the time taken for 99.999 percentile of commands to finish the round-trip from host to drive and to host. Typical Latency is measured as the time taken for 99.9 percentile of commands to finish the round-trip from host to drive and to host.
6. Total Bytes Written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
7. Drives Writes Per Day (DWPD).Item Dimension (L inchxW inchxH inch)
4 x 3 x 1

Weight
1 lb

Warranty Information
5 Years