Draw Tite 65053 Front Mount Receiver Hitch 65053_68

This item is brand-new, factory sealed.

• Up to 9000 pounds of line pull and up to 500 pounds vertical load
• Allow a variety of accessories to be mounted on the front of trucks vans or SUVs to perform tasks that make outdoor adventures and activities easier and more fun
• Accessories are easily interchanged so the receiver is a practical and versatile addition to sporting and work vehicles
• 2 inch square receiver tube opening and all attachments are J-Pin ready
• METALSHIELD protective coating

• Manufacturer: Draw-Tite
• Brand: Reese
• Model: 65053
• Item Weight: 32 pounds
• Item model number: 65053
• Is Discontinued By Manufacturer: No
• Manufacturer Part Number: 65053
• OEM Part Number: 65053

Front mounted hitch receivers allow a variety of accessories to be mounted on the front of trucks, vans, or SUVs to perform tasks that make outdoor adventures and activities easier and more fun. Accessories are easily interchanged, so the receiver is a practical and versatile addition to sporting and work vehicles. All front mount receivers have a 2 square receiver tube opening and all attachments are J-Pin ready. Front mounted receivers offer a secure and useful attachment point and offer 9000 lbs. of line pull and 500 lbs. vertical load. The METALSHIELD protective coating process is a three step finish consisting of a rust inhibiting primer, dipped E-coat electrostatic coating to insure total finish coverage and finally an outer powder coat finish for durability. The METALSHIELD process is an OEM compatible finish providing the best corrosion protection over brands that use only powder coat on their products. Install time is an estimated 40 minutes and requires 8, 21mm deep socket and 7/8" wrenches and 3/8" and 1/2" drill bits. Fascia trimming required. Hitch crosstube concealed behind bumper. Rubber air deflector/facia must be removed or trimmed to install hitch.