Hynix HMA82GR7DJR8NXN 16GB DDR4-3200 ECC Registered Memory

This item is brand-new, factory sealed.

SK hynix Registered DDR4 SDRAM DIMMs (Registered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices.

These Registered SDRAM DIMMs are intended for use as main memory when installed in systems such as servers and workstations.


Features

Power Supply: VDD=1.2V (1.14V to 1.26V)

VDDQ = 1.2V (1.14V to 1.26V)

VPP - 2.5V (2.375V to 2.75V)

VDDSPD=2.25V to 2.75V

Functionality and operations comply with the DDR4 SDRAM datasheet

16 internal banks

Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available

Data transfer rates: PC4-3200, PC4-2933, PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Supports ECC error correction and detection

On-Die Termination (ODT)

Temperature sensor with integrated SPD

This product is in compliance with the RoHS directive.

Per DRAM Addressability is supported

Internal Vref DQ level generation is available

Write CRC is supported at all speed grades

DBI (Data Bus Inversion) is supported(x8)

CA parity (Command/Address Parity) mode is supported Density
16GB Organization
2Gx72 Component Composition
1Gx8(H5AN8G8NDJR) x18 Number of ranks
2 MT/s
DDR4-3200 Grade
-XN tCK(ns)
0.625 CAS Latency(tCK)
22 tRCD(ns)
13.75 tRP(ns)
13.75 tRAS(ns)
32 tRC(ns)
47 CL-tRCD-tRP
22-22-22Item Dimension (L inchxW inchxH inch)
3 x 7 x 1

Weight
1.00 lb

Warranty Information
1 Year