JBL D200-8 1 Screw On Driver 50w Rms 100w Max

This item is brand-new, factory sealed.

• * Nominal impedance: 8 W * Minimum impedance at 489 Hz: 6.4 W * Power handling * Musical Program (w/ xover 500 Hz 12 dB / oct)1:100 W * RMS (NBR 10.303)1(w/ xover 500 Hz 12dB/oct)2 .50 W * Sensitivity * On horn, 2.83V at 1m, on axis3: 107 dB SPL * On plane-wave tube,0.0894V4: 116 dB SPL * Frequency response at -10 dB: 500 to 7,000 Hz
• * Throat diameter: 25 (1) mm (in) * Diaphragm material: Phenolic * Voice coil diameter: 51 (2) mm (in) * Re: 6.0 W * Flux density: 1.0 T * Minimum recommended crossover (12 dB / oct): 500 Hz * Musical Program= 2 x W RMS. * 2 Brazilian standard NBR 10.303, w/pink noise during 2 uninterrupted hours. * 3 Measured w/HL14-25 horn, 1,000 - 3,500 Hz average. * 4 The sensitivity represents the SPL in a 25 mm terminated tube, 600 - 1,500 Hz average.
• ADDITIONAL INFORMATION : Magnet material : Barium ferrite | Magnet weight : 290 (10.2) g (oz) | Magnet diameter x depth : 102 x 10 (4.02 x 0.47) mm (in) | Magnetic assembly weight : 860 (1.89) g (lb) | Housing material : A BS polymer | Housing color : Black | VOICE COIL MATERIAL : Voice coil former material : Polyimide (Kapton) | Voice coil winding length : 5.7 (18.70) m (ft) | Voice coil winding depth : 3.0 (0.12) mm (in) | Volume displaced by driver : 0.5 (0.018) l (ft3) |
• MOUNTING INFORMATION : Horn connection : Screw-on 1 3/ " - 18 TPI 8 | Connectors : Push terminals | Net weight : 1,022 (2.24) g (lb) | Gross weight : 1,085 (2.38) g (lb) | Carton dimensions (W x D x H) : 13.5 x 13.5 x 0.8 (5.3 x5.3 x 3.2) cm (in) | Polarity : Positive voltage applied to the positive terminal (red) gives diaphragm motion toward the throat | Wire temperature coefficient of resistance (a25) : 0.00404 1/ Degrees C |
• FEATURES: * Assembly without necessity of screws, providing great easiness in the eventual exchange of repair RPD200 & guaranteeing bigger protection against humidity * Basket of synthetic material injected & high temperatures resistant * Throat 1-in standard * Fabric diaphragm of poliamida w/high humidity resistance * Voice coil w/ copper wire rolling up of high thermal resistance & body of Kapton * Kapton Trademark DuPont * Selenium engineers suggest to use the faston connectors supplied

• Product Dimensions: 5.3 x 5.3 x 3.2 inches
• Item Weight: 2.18 pounds
• Manufacturer: JBL

JBL Professional D200 Throat 1-in Standard & Phenolic Diaphragm 50 Watts Rms 8 Ohms 100 Max Subwoofer Compression Driver || * Nominal impedance: 8 W * Minimum impedance at 489 Hz: 6.4 W * Power handling * Musical Program (w/ xover 500 Hz 12 dB / oct)1:100 W * RMS (NBR 10.303)1(w/ xover 500 Hz 12dB/oct)2 .50 W * Sensitivity * On horn, 2.83V at 1m, on axis3: 107 dB SPL * On plane-wave tube,0.0894V4: 116 dB SPL * Frequency response at -10 dB: 500 to 7,000 Hz || * Throat diameter: 25 (1) mm (in) * Diaphragm material: Phenolic * Voice coil diameter: 51 (2) mm (in) * Re: 6.0 W * Flux density: 1.0 T * Minimum recommended crossover (12 dB / oct): 500 Hz * Musical Program= 2 x W RMS. * 2 Brazilian standard NBR 10.303, w/pink noise during 2 uninterrupted hours. * 3 Measured w/HL14-25 horn, 1,000 - 3,500 Hz average. * 4 The sensitivity represents the SPL in a 25 mm terminated tube, 600 - 1,500 Hz average. || ADDITIONAL INFORMATION : Magnet material : Barium ferrite | Magnet weight : 290 (10.2) g (oz) | Magnet diameter x depth : 102 x 10 (4.02 x 0.47) mm (in) | Magnetic assembly weight : 860 (1.89) g (lb) | Housing material : A BS polymer | Housing color : Black | VOICE COIL MATERIAL : Voice coil former material : Polyimide (Kapton) | Voice coil winding length : 5.7 (18.70) m (ft) | Voice coil winding depth : 3.0 (0.12) mm (in) | Volume displaced by driver : 0.5 (0.018) l (ft3) | || MOUNTING INFORMATION : Horn connection : Screw-on 1 3/ " - 18 TPI 8 | Connectors : Push terminals | Net weight : 1,022 (2.24) g (lb) | Gross weight : 1,085 (2.38) g (lb) | Carton dimensions (W x D x H) : 13.5 x 13.5 x 0.8 (5.3 x5.3 x 3.2) cm (in) | Polarity : Positive voltage applied to the positive terminal (red) gives diaphragm motion toward the throat | Wire temperature coefficient of resistance (a25) : 0.00404 1/ Degrees C | || FEATURES: * Assembly without necessity of screws, providing great easiness in the eventual exchange of repair RPD200 & guaranteeing bigger protection against humidity * Basket of synthetic material injected & high temperatures resistant * Throat 1-in standard * Fabric diaphragm of poliamida w/high humidity resistance * Voice coil w/ copper wire rolling up of high thermal resistance & body of Kapton * Kapton Trademark DuPont * Selenium engineers suggest to use the faston connectors supplied