Synology SNV5400 SNV5420-800G 800 GB Solid State Drive - M.2 2280 Internal - PCI Express NVMe [PCI Express NVMe 3.0 x4]

This item is brand-new, factory sealed.

Enterprise Series M.2 NVMe SSD

Supercharge I/O performance

Supercharge your NAS/SAN

Enterprise Series M.2 NVMe SSDs are designed to intelligently work with Synology DiskStation Manager (DSM) to boost I/O performance. These high-performance NVMe drives accelerate the slower but higher-capacity storage space provided by traditional hard drives, enabling cost-effective, in-place upgrades for existing systems.

Performance

Up to 120,000 4K random write IOPS ^note1

Endurance

Up to 2,900 TBW ^note2

Analytics

Actionable insight for optimal performance and longevity^note3

Updates

Automatic firmware updates with DSM^note4

Consistently fast caching for 24/7 environments

Designed specifically for Synology systems, Enterprise Series M.2 NVMe SSDs are built for maximum performance consistency. Each drive is rated for up to 660,000/120,000 4K random read/write IOPS^note1 across the usable lifespan of the drive. Endurance of up to 2,900 TBW ensures longevity. ^note2

Data integrity safeguards

The SNV3500 and SNV5400 Series offer full end-to-end data protection, including power loss protection to ensure data integrity during unexpected shutdowns. These series have capacitors in their power loss protection circuits to safely write cached data to NAND flash memory during power failures, thus preventing data loss.

Notes:

1. Performance was measured using FIO on Linux with Queue Depth 256 (4 KB = 4,096 bytes).

2. The endurance rating was calculated based on a JESD219A enterprise workload.

3. Lifetime analytics are available in DSM 6.2.3-25426 and above.

4. Automatic firmware updates are available in DSM 6.2.4-25556 and above.Hardware Specifications
General
Capacity
800 GB
Form Factor
M.2 2280
Interface
NVMe PCIe 3.0 x4Performance
Sustained Sequential read (128 KB, QD32)
3,000 MB/s
Sustained Sequential write (128 KB, QD32)
1,000 MB/s
Sustained Random Read (4KB, QD256)
400,000 IOPS
Sustained Random Write (4KB, QD256)
70,000 IOPS
Notes
- Performance specifications represent single-unit SSD performance results obtained from Synologys testing environment, actual performance may vary according to the host systems hardware and software setup.
- The specifications have undergone thorough review and verification by Synology to ensure they meet the performance demands and compatibility standard of each Synology system while providing high reliability.
- All performance measurements refer to sustained performance achieved in a steady state, as defined by test specifications in accordance with the Storage Networking Industry Association (SNIA).
- Synology reserves the right to replace SSD modules with components from different suppliers based on product life cycle status and supply availability. All replacements are rigorously tested to the same standards to ensure equivalent compatibility, stability, and performance.Endurance and Reliability
Terabytes Written (TBW) ^note
>1,400 TB
Power Loss Protection
Yes
Notes
- The TBW specifications denote the baseline endurance levels for Synology SSDs and are calculated using the JESD219A enterprise workload.Power Consumption
Active Read (Typ.)
5 W
Active Write (Typ.)
5.5 W
Idle
2.5 W
Notes
Power consumption may differ according to configurations and platforms.Temperature
Operating Temperature
0^oC to 85^oC (32^oF to 185^oF)
Storage Temperature
-40^oC to 85^oC (-40^oF to 185^oF)Applied Models
- M.2 SSD via Internal slot
- M.2 SSD via E10M20-T1
- M.2 SSD via M2D20
- M.2 SSD via M2D18Item Dimension (L inchxW inchxH inch)
6 x 4 x 1

Weight
1.00lb

Warranty Information
5 years