tripp lite power management
Tripp Lite 2000W APS 12VDC 120V Inverter / Charger w/ Auto Transfer Switching ATS Hardwired (APS2012)
- SKU:
- 19847315
- MPN:
- aps2012
- Availability:
- Out of stock
- Stock Update:
- 07/03/2025 11:50:07 AM PST
- Stock Update:
- 07/03/2025 11:50:07 AM PST
Description
This item is brand-new, factory sealed.
Tripp Lite's APS2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 120V AC power from any 12V battery or automotive DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 25/100 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compress
Package Contents:
- PowerVerter APS Inverter/Charger 2000W
- APS2012 Inverter/Charger
- Instruction manual with warranty information
Features
Additional Information:
- Extended Run UPS Configure as a UPS for long-term battery support of telecom systems, security alarms, computer systems and various other motorized and electronic loads.
- Standalone Power Alternative power source for use in off-grid, backwoods, alternative energy and export applications where commercial power is not continuously available.
- Automotive Connect to an automotive electrical system to run power tools, computers, electronic test equipment, home entertainment and other AC appliances in fleet service vehicles, over-the-road trucks, campers, RVs, minivans and more.
- Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
- Frequency control for operating stability
- User supplies cabling, 4 gauge or larger recommended
- Cooling Method: Fan
- Auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts
- RJ45 port allows connection of APS remote switch
- Battery runtime is dependent upon the size and number of user-supplied batteries in 12V configuration
- Advanced 20/60 amp selectable , 3-stage battery charger and selector switch for gel or wet cell batteries
- Resettable circuit breaker protects APS against system overload
Low voltage transfer to battery power:
- User configurable to 75V, 85V, 95V and 105V
High voltage transfer to battery power:
- User configurable to 135V, 145V
LED Alarm and Switches:
- Front Panel LEDS : Six LEDS
- Switches : Three position on/off/remote switch enables simple on/off power control plus auto or remote setting
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Country of Origin:
China
Specs
| Power Description | |
| Maximum Frequency | 60 Hz |
| Continuous Power Load | 2000 W |
| Input Voltage Range | 10 V DC - 15 V DC |
| Input Voltage | 12 V DC |
| Peak Power Load | 4000 W |
| Output Voltage | 120 V AC |
| Waveform Type | Pulse-width Modulated Sine Wave |
| Physical Characteristics | |
| Weight (Approximate) | 40 lb |
| Product Color | Black |
| Height | 7.3" |
| Color Family | Black |
| Width | 8.5" |
| Depth | 16.3" |
| Warranty | |
| Limited Warranty | 1 Year |
| General Information | |
| Brand Name | Tripp Lite series |
| Manufacturer Website Address | http://www.eaton.com |
| Marketing Information | The APS2012 2000W PowerVerter APS 12V DC 120V AC Inverter/Charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it's an excellent alternative to generator power. The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 2000W of continuous power, 3000W up to one hour, or 4000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage. Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, the APS2012 converts stored power from any 12V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 120V AC source, the unit keeps the user-supplied battery charged via a three-stage 25/100A selectable charging system while simultaneously delivering AC power to connected equipment. When used as a UPS, the APS2012 responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on the unit indicate load level, battery charge level, shutdown status and system fault status. More from the Manufacturer |
| Product Type | Power Inverter |
| Product Name | 2000W PowerVerter APS 12VDC 120V Inverter/Charger |
| Manufacturer | Eaton Corporation |
| Manufacturer Part Number | APS-2012 |
| Product Series | APS |
| Product Line | PowerVerter |
| Technical Information | |
| Plug/Connector Type | Hardwired |
| Receptacles | Hardwired |
Warranty Information
