Tripplite
Tripp Lite Cat6 Wall-Mount PoE Patch Panel 12-Port 110/Krone 568A/B RJ45 (n250-p12)
- SKU:
- 18160518
- MPN:
- n250-p12
- Availability:
- Usually ships the same or next business day. In stock at our CA, GA, PA warehouses.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 01/20/2026 06:09:02 AM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 2 | and pay only $56.32 each 56.32 |
| Buy 3 or above | and pay only $52.48 each 52.48 |
- Stock Update:
- 01/20/2026 06:09:02 AM PST
Description
This item is brand-new, factory sealed.
12-Port Patch Panel Manages and Organizes High-Density Cat6 Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-P12 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Effortlessly Mounts to a Wall or Desk Using the Included Frame
The 12-port patch panel is constructed from aluminum with an ABS plastic frame that mounts to a wall, desk or similar flat surface. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter.
TAA-Compliant for GSA Schedule Purchases
The N250-P12 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N250-P12 is backed by a lifetime warranty, ensuring reliability and performance.
Typical Applications
- Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets
- Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration
Package Contents:
- N250-P12 12-Port Wall-Mount Cat6 Patch Panel - PoE+ Compliant
- 4 x Cable Ties
- Installation Instructions
Features
- N250-P12 12-Port Wall-Mount Cat6 Patch Panel - PoE+ Compliant
- 4 x Cable Ties
- Installation Instructions
Certifications & Standards:
- N250-P12 12-Port Wall-Mount Cat6 Patch Panel - PoE+ Compliant
- 4 x Cable Ties
- Installation Instructions
TAA Compliant:
Yes
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Country of Origin:
Taiwan
Specs
| Physical Characteristics | |
| Product Material |
|
| Form Factor | Wall Mountable |
| Product Color | Black |
| Height | 2.2" |
| Color Family | Black |
| Width | 10" |
| Depth | 1.9" |
| Warranty | |
| Limited Warranty | Lifetime |
| Interfaces/Ports | |
| Total Number of Ports | 12 |
| Number of Network (RJ-45) Ports | 12 |
| General Information | |
| Brand Name | Tripp Lite series |
| Manufacturer Website Address | http://www.eaton.com |
| Marketing Information | 12-Port Patch Panel Manages and Organizes High-Density Cat6 Network Cabling This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications. Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-P12 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load. Effortlessly Mounts to a Wall or Desk Using the Included Frame The 12-port patch panel is constructed from aluminum with an ABS plastic frame that mounts to a wall, desk or similar flat surface. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter. TAA-Compliant for GSA Schedule Purchases The N250-P12 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Lifetime Warranty The N250-P12 is backed by a lifetime warranty, ensuring reliability and performance. Typical Applications Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration More from the Manufacturer |
| Product Type | Network Patch Panel |
| Product Name | N250-P12 12-Port Wall-Mount Cat6 Patch Panel - PoE+ Compliant |
| Manufacturer | Eaton Corporation |
| Manufacturer Part Number | N250P12 |
| Product Model | N250-P12 |
Warranty Information
