Tripp Lite
Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA (B126-1P0)
- SKU:
- 18140916
- MPN:
- b126-1p0
- Availability:
- Usually ships the same or next business day. In stock at our PA warehouse.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 04/25/2024 12:17:43 PM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 2 | and pay only $40.73 each 40.73 |
Buy 3 | and pay only $38.77 each 38.77 |
Buy 4 - 9 | and pay only $36.77 each 36.77 |
Buy 10 - 16 | and pay only $35.00 each 35 |
Buy 17 or above | and pay only $33.83 each 33.83 |
- Stock Update:
- 04/25/2024 12:17:43 PM PST
Description
This item is brand-new, factory sealed.
The B126-1P0 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to a monitor up to 50 ft. away using Cat5e/6 cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) No power is required, and its built-in HDMI male connector plugs directly into a monitor without the need for an additional cable. Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM). Installation is simple. Connect the transmitter unit to an HDMI source using a Tripp Lite P568-Series HDMI cable (not included). Connect the built-in HDMI connector on the receiver unit directly to a display. Finally, connect the receiver to the RJ45 port on the transmitter using a single Cat5e/6 cable. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Package Contents:
- B126-1P0 Video Console
- Owner's Manual
Features
- B126-1P0 Video Console
- Owner's Manual
Certifications & Standards:
- TAA
- HDCP
TAA Compliant:
Yes
Environmentally Friendly:
Yes
Country of Origin:
Taiwan
Specs
Physical Characteristics | |
Form Factor | Desktop |
Product Color | Black |
Color Family | Multicolor |
Warranty | |
Limited Warranty | 1 Year |
Interfaces/Ports | |
Network (RJ-45) | Yes |
HDMI Out | Yes |
Number of HDMI Outputs | 1 |
Number of Network (RJ-45) Ports | 1 |
General Information | |
Brand Name | Tripp Lite by Eaton |
Manufacturer Website Address | https://tripplite.eaton.com/ |
Marketing Information | The B126-1P0 HDMI over Cat5/Cat6 Passive Remote Receiver works with Tripp Lite's B126-002 and B126-004 transmitters to extend an HDMI signal to multiple projectors, monitors or televisions in a chain. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow. The B126-1P0 can extend a 1080i (60 Hz) signal up to 100 feet (30.5 m) or a 1080p (60 Hz) signal up to 50 feet (15.2 m) with a single Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series) between it and the transmitter. The built-in HDMI cable features a latching connector that helps prevent accidental disconnection. No external power is required. In addition to crystal-clear video, the B126-1P0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. |
Product Type | Video Extender Receiver |
Product Name | B126-1P0 Video Console |
Manufacturer | Tripp Lite by Eaton |
Manufacturer Part Number | B126-1P0 |
Product Model | B126-1P0 |
Media & Performance | |
Twisted Pair Cable Standard | Category 6 |
Media Type Supported | Twisted Pair |
Technical Information | |
Maximum Operating Distance | 100 ft |
Number of Input Devices Supported | 1 |
Connectivity Technology | Wired |
Number of Output Devices Supported | 1 |