Tripplite
Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)
(No reviews yet)
Write a Review
- SKU:
- 18061152
- MPN:
- smart1200xlhg
- Availability:
- Out of stock
- Stock Update:
- 04/30/2024 05:01:34 PM PST
- Stock Update:
- 04/30/2024 05:01:34 PM PST
Description
This item is brand-new, factory sealed.
Tripp Lite SMART1200XLHG offers medical-grade UPS protection with built-in line interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. UL2601-1 listed as medical electrical equipment with less than 300 microamps leakage current for the UPS and all connected equipment. Built-in isolation transformer with faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Includes high quality hospital grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, internetworking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (part# BP36V27). Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1-RS-232, 1-USB) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.Package Contents:
- SmartPro 1200XLHG UPS
- SMART 1200XLHG Medical Grade Tower UPS System
- PowerAlert Software and cabling
- Warranty information
- Instruction manual
Features
Package Contents:
UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Taiwan
- SmartPro 1200XLHG UPS
- SMART 1200XLHG Medical Grade Tower UPS System
- PowerAlert Software and cabling
- Warranty information
- Instruction manual
Certifications & Standards:
UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Additional Information:
- Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
- Maintains less than 300 microamps leakage current for UPS and all connected equipment
- Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
- Provides connected equipment with continuous power during short and long duration loss of commercial power
- Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
- Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
- Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
- Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
- Resistant to electrostatic discharge
- Supports loads up to 1000VA / 750 watts
- 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
- 4 protected hospital-grade outlets; 6-ft. cord
- 1-RS-232 and 1-USB serial port for network interface; SNMP compatible
- SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
- Complete surge protection, line isolation and EMI/RFI noise filtering
- 2 year product warranty
- PowerAlert unattended shutdown software and complete cabling included
- 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
- Battery replacement door
- Back panel grounding lug
Country of Origin:
Taiwan
Specs
| Power Description | |
| Load Capacity (Watt) | 750 W |
| Input Voltage | 120 V AC |
| Output Voltage |
|
| Load Capacity (VA) | 1000 VA |
| Physical Characteristics | |
| Form Factor | Tower |
| Weight (Approximate) | 44.60 lb |
| Height | 12.8" |
| Width | 7.5" |
| Depth | 9" |
| Warranty | |
| Limited Warranty | 2 Year |
| Controls/Indicators | |
| Status Indicators | Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning |
| Interfaces/Ports | |
| USB | Yes |
| Battery Information | |
| Backup/Run Time (Full Load) | 10 Minute |
| Battery Life | 6 Year |
| Battery Chemistry | Lead Acid |
| Hot Swappable | Yes |
| Backup/Run Time (Half Load) | 28 Minute |
| Typical Battery Recharge Time | 4 Hour |
| General Information | |
| Brand Name | Tripp Lite by Eaton |
| Manufacturer Website Address | https://tripplite.eaton.com/ |
| Marketing Information | Tripp Lite's SMART1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load or 10 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output without drawing battery power. The SMART1200XLHG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise, while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup protection and surge protection rated to 940 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Ideal UPS Backup in Healthcare Facilities Complies with UL 60601-1 standards for use in patient-care facilities Isolation transformer with Faraday shield offers full isolation and removes common mode noise 6 ft. power cord with 120V NEMA 5-15P-HG plug Floating AC output prevents noise coupling and meets agency requirements for isolation Reliable Battery Backup and Surge Protection Supports half load up to 28 min. and full load up to 10 min. 4 NEMA 5-15R-HG outlets with 940-joule surge protection Filters out disruptive EMI/RFI line noise that can cause equipment damage or data loss Resists electrostatic discharge LEDs and Audible Alarms Front LEDs indicate power, mode, load and battery status Alarms alert you to power failure, overload and low battery Mute/quiet mode ideal for use in quiet patient-care vicinities Saves Files When You're Away Included PowerAlert® software enables safe, unattended system shutdown and file saving during power failures Connects to computer via DB9 or USB port with included cables More from the Manufacturer |
| Product Type | Line-interactive UPS |
| Product Name | SmartPro 1200XLHG UPS |
| Manufacturer | Tripp Lite by Eaton |
| Manufacturer Part Number | SMART1200XLHG |
| Product Line | SmartPro |
| Technical Information | |
| Receptacle Type | NEMA 5-15R |
| Receptacle Detail | 4 x NEMA 5-15R |
| Plug/Connector Type | NEMA 5-15P |
| Cord Length | 6 ft |
| Transfer Time | 4 ms |
| Management | |
| Network Management | SNMP Manageable |
| Alarm |
|
| Environmental Conditions | |
| Maximum Operating Temperature | 104°F (40°C) |
Warranty Information
All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose
Tripp Lite UPS Smart 1000VA 750W Tower Hospital Medical AVR 120V USB DB9 (SMART1200XLHG)