Bogen
Bogen Line-Matching Transformer with Speaker-Level Signal Adapter (WMT1AS)
- SKU:
- 18125938
- MPN:
- wmt1as
- Availability:
- Usually ships the same or next business day. In stock at our OH warehouse.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 04/25/2024 05:20:28 PM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 2 | and pay only $63.04 each 63.04 |
Buy 3 | and pay only $61.08 each 61.08 |
Buy 4 - 8 | and pay only $60.10 each 60.1 |
Buy 9 or above | and pay only $57.17 each 57.17 |
- Stock Update:
- 04/25/2024 05:20:28 PM PST
Description
This item is brand-new, factory sealed.
The line-matching transformer shall be a Bogen Model WMT1AS, or equivalent, capable of matching either inputs from, or outputs to, a 600-ohm line. It shall provide a perfect impedance match between a 600-ohm balanced line and the high-impedance input of an amplifier, or the 25V output of an amplifier. Frequency response shall be 2 dB from 50 Hz to 20 kHz. Less than 0.1 volt across a 600-ohm line shall be required for full output power from an average amplifier (maximum level, +20 dBm). Output shall be approximately 1.73 volts when connected across the 25V output tap or WMT1AS Hi-Z output connection of a Bogen amplifier.
Line input or output connections from the 600-ohm line shall be made via a three-screw terminal strip. Connection to the auxiliary input of an amplifier shall be by means of a shielded cable terminated in an RCA plug. Provisions shall be included to connect the unit to a microphone input. The WMT1AS can also adapt speaker-level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier. The mounting bracket shall allow the transformer to be mounted by means of two steel screws. The unit shall measure 2" W x 2-3/8" H x 1-1/4" D and the product weight shall be 4 oz.
Features
Bogen Amplifier
Specs
Physical Characteristics | |
Weight (Approximate) | 4 oz |
Height | 2.4" |
Width | 2" |
Depth | 1.3" |
Warranty | |
Limited Warranty | 2 Year |
General Information | |
Brand Name | Bogen |
Manufacturer Website Address | http://www.bogen.com |
Marketing Information | The line-matching transformer shall be a Bogen Model WMT1AS, or equivalent, capable of matching either inputs from, or outputs to, a 600-ohm line. It shall provide a perfect impedance match between a 600-ohm balanced line and the high-impedance input of an amplifier, or the 25V output of an amplifier. Frequency response shall be ±2 dB from 50 Hz to 20 kHz. Less than 0.1 volt across a 600-ohm line shall be required for full output power from an average amplifier (maximum level, +20 dBm). Output shall be approximately 1.73 volts when connected across the 25V output tap or WMT1AS Hi-Z output connection of a Bogen amplifier. Line input or output connections from the 600-ohm line shall be made via a three-screw terminal strip. Connection to the auxiliary input of an amplifier shall be by means of a shielded cable terminated in an RCA plug. Provisions shall be included to connect the unit to a microphone input. The WMT1AS can also adapt speaker-level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier. The mounting bracket shall allow the transformer to be mounted by means of two steel screws. The unit shall measure 2" W x 2-3/8" H x 1-1/4" D and the product weight shall be 4 oz. |
Product Type | Impedance Matching Transformer |
Product Name | Line-Matching Transformer with Speaker-Level Signal Adapter |
Manufacturer | Bogen Communications International, Inc |
Manufacturer Part Number | WMT1AS |
Product Model | WMT1AS |
Technical Information | |
Output Receptacle Type | Terminal Block |
Input Receptacle Type | RCA |