Antec Performance1FT Performance 1 FT Full-Tower E-ATX PC Gaming Case

This item is brand-new, factory sealed.

Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUnity software must be installed.


I/O Panel

Including the mainstream Type-C(10Gbps) port for high-speed transfer

Included dust plugs for dust prevention.

Mic/Audio 2-in-1 port.


4mm Tempered Glass Side Panel

Both side panels adopt tempered glass for better PC showcase visual effects.


Cable Management on Point

2 cable covers are included for beautifying the cable management area.

There are ten sets of straps for easy cable management.

1.Three sets of straps for fan & I/O cable routing.

2.Five straps for hardware and power supply cables.

3.Two straps at the rear for rear I/O cable routing.


PRE-INSTALLED 4 FANS OF 30MM THICKNESS

Storm T3 PWM Fan

3 x Storm T3 140mm PWM Fans at the Front.

1 x Storm T3 120mm PWM Fan at the Rear.


Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.


Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling


Best Cooling Design

Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)

Supports 360mm radiators at the front and top simultaneously.

Up to 10 fans simultaneously.Main spec
Form Factor
Full Tower
Materials
Steel + Plastic + Glass
Mainboard Support
E-ATX, ATX, Micro-ATX, ITX
Front Access and Controls
Power, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1
Side Panel
4mm Tempered Glass(Both Sides)Drive Bays
Expansion Slots
8
3.5" / 2.5"
2 / 2
2.5"
3Fan Support
Front
3 x 120mm / 3 X 140mm
Top
3 x 120mm / 3 x 140mm
Power Supply Shroud
3 x 120mm
Rear
1 x 120mm
Included Fan(s)
3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear
Pre-installed Storm T3 PWM fan specs vary from the retail versionRadiator Support
Front
120 / 140 / 240 / 280 / 360 / 420mm
Top
120 / 140 / 240 / 280 / 360mm
Rear
120mmClearance
Max GPU Length
< or equals 400mm
Max CPU Cooler Height
< or equals 175mm
Max PSU Length
(Include cable) < or equals 245mm (with HDD)
(Include cable) < or equals 440mm (without HDD)Miscellaneous
Dust Filter
Front / Top / BottomItem Dimension (L inchxW inchxH inch)
24 x 13 x 25

Weight
50 lbs

Warranty Information
2 Years