Black Box Network Services
Black Box FlexPoint 14-Slot Media Converter Chassis (LMC200)
- SKU:
- 19106681
- MPN:
- lmc200
- Availability:
- Usually ships the same or next business day. In stock at our CA, IL warehouses.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 09/28/2026 11:45:05 PM PST
- Stock Update:
- 09/28/2026 11:45:05 PM PST
Description
This item is brand-new, factory sealed.
The FlexPoint Power Chassis holds and powers up to 14 FlexPoint Modular Media Converters or Mode Converters in a convenient rackmount chassis. FlexPoint™ Converters from Black Box are versatile and cost-effective standalone converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.
The incredible variety and versatility of the FlexPoint system make it ideal for networks that are subject to constant upgrades and changes. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in a FlexPoint Power Chassis.
This Power Chassis holds 14 converters and features a single 115-230-VAC power supply with room for a second hot-swappable AC (PSFP200) or DC (PSFP20-DC) power supply. It's rack-mountable in 2U of rack space. The Power Chassis can be used with any FlexPoint units, including media converters, mode converters, and line drivers.
Specs
| Power Description | |
| Number of Power Supplies Supported | 1 |
| Input Voltage |
|
| Physical Characteristics | |
| Form Factor |
|
| Weight (Approximate) | 6.40 oz |
| Height | 1" |
| Width | 3" |
| Depth | 4" |
| General Information | |
| Brand Name | Black Box |
| Manufacturer Website Address | http://www.blackbox.com |
| Marketing Information | To extend your serial connections over secure, interference-free fiber optic media, order BLACK BOX® FlexPoint RS-232 to Fiber Converters. Ideal for extending links to RS-232 equipment such as controllers, modems, and terminals in industrial networking or office applications, these fiber converters feature baud-rate autosensing at speeds up to 115.2 kbps and, for user flexibility, support half- or full- duplex modes of operation. With the multimode versions, you can extend RS-232 data up to 2.5 kilometers (1.5 mi.) or 5 kilometers (3.1 mi.). For extra range, such as in long-haul fiber applications, order the single-mode models. Depending on the models ordered, they support long- distance links as as far as 28 kilometers (17.4 mi.) Connecting a serial device is easy. Just attach the RS-232 port via a male DB9 serial cable to the RS-232 equipment. The FlexPoint RS-232 to Fiber Converters also feature switch-selectable DTE/DCE configuration. When connecting the RS-232 cable to data terminal equipment such as a computer or controller, you just flip up the DTE switch. And when you need to link to data communication equipment, such as a modem or printer, you just flip down the DCE switch. And there's no special crossover cabling needed either. An ordinary straight-through cable works whether you're connecting data terminal or data communications equipment in your application. Flow control can be accessed via software using the X-ON/X- OFF protocol or via the supported RTS, CTS, DCD, DTR, and DCR flow control signals. To assist you with the installation, operation, and troubleshooting of the converters, FlexPoint RS-232 to Fiber Converters feature an informative diagnostic LED display that provides at-a-glance status information. The media converters also have a loopback feature set for remote fiber testing. By initiating remote loops, you can verify the integrity of the fiber link connection-without actual data activity on the link itself. You can test both ends of the fiber from one location with no need to set switches on both units simultaneously. When the fiber loopback switch is set in this mode of operation, the local unit's fiber transmit port is encoded to carry a remote loopback protocol over the fiber to the far-end converter and return a signal back to the originating unit. LEDs on the local and remote units will blink to indicate that there's a good fiber link between the converters. You can use FlexPoint RS-232 to Fiber Converters as standalone, rackmount, or wallmount units. You can also mount multiple units in a FlexPoint 14-Slot Power Chassis, which features an AC power supply and can be used to hold other devices in the FlexPoint family. |
| Product Type | Media Converter Chassis |
| Product Name | FlexPoint 14-Slot Power Chassis Single Power Supply |
| Manufacturer | Black Box Corporation |
| Manufacturer Part Number | LMC200 |
| Product Model | LMC200 |
| Product Line | FlexPoint |
Warranty Information
